Một số lớp bộ sưu tập có thể thay đổi. Các phương thức cộng, trừ hoặc sắp xếp lại các thành viên của chúng tại chỗ và không trả về một mục cụ thể, không bao giờ trả về chính thể hiện của bộ sưu tập nhưng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631
Một số hoạt động được hỗ trợ bởi một số loại đối tượng; . Hàm thứ hai được sử dụng ngầm khi một đối tượng được viết bởi hàm
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 634
Kiểm tra giá trị thực¶
Bất kỳ đối tượng nào cũng có thể được kiểm tra giá trị thực, để sử dụng trong điều kiện
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 635 hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 636 hoặc dưới dạng toán hạng của phép toán Boolean bên dưới
Theo mặc định, một đối tượng được coi là đúng trừ khi lớp của nó định nghĩa phương thức
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 637 trả về
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 hoặc phương thức
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 639 trả về 0 khi được gọi với đối tượng. 1 Dưới đây là hầu hết các đối tượng tích hợp được coi là sai
constants defined to be false.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
31 vàdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
38số không của bất kỳ loại số nào.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
42,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
43,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
44,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
45,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
46trình tự và bộ sưu tập trống.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
47,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
48,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
49,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
50,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
51,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
52
Các phép toán và hàm dựng sẵn có kết quả Boolean luôn trả về
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 642 hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 nếu sai và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 655 hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 nếu đúng, trừ khi có quy định khác. [Ngoại lệ quan trọng. các phép toán Boolean
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 657 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 658 luôn trả về một trong các toán hạng của chúng. ]
Phép toán Boolean — def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
58, def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
57, def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
61¶
Đây là các phép toán Boolean, được sắp xếp theo mức độ ưu tiên tăng dần
Hoạt động
Kết quả
ghi chú
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 662
nếu x sai, thì y, ngược lại x
[1]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 663
nếu x sai, thì x, ngược lại y
[2]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 664
nếu x sai, thì
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656, ngược lại thì
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638
[3]
ghi chú
Đây là toán tử ngắn mạch, vì vậy nó chỉ đánh giá đối số thứ hai nếu đối số thứ nhất sai
Đây là toán tử ngắn mạch, vì vậy nó chỉ đánh giá đối số thứ hai nếu đối số thứ nhất đúng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
61 có mức ưu tiên thấp hơn so với các toán tử không phải Boolean, do đó,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
68 được hiểu làdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
69 vàdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
70 là một lỗi cú pháp
So sánh¶
Có tám thao tác so sánh trong Python. Tất cả chúng đều có cùng mức độ ưu tiên [cao hơn so với các phép toán Boolean]. So sánh có thể được xâu chuỗi tùy ý;
This table summarizes the comparison operations
Hoạt động
Meaning
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 674
strictly less than
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 675
nhỏ hơn hoặc bằng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 676
strictly greater than
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 677
greater than or equal
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 678
equal
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 679
not equal
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 680
object identity
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 681
negated object identity
Objects of different types, except different numeric types, never compare equal. Toán tử
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 678 luôn được xác định nhưng đối với một số loại đối tượng [ví dụ: đối tượng lớp] tương đương với
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 680. The
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 674,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 675,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 676 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 677 operators are only defined where they make sense; for example, they raise a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 688 exception when one of the arguments is a complex number
Non-identical instances of a class normally compare as non-equal unless the class defines the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 689 method
Instances of a class cannot be ordered with respect to other instances of the same class, or other types of object, unless the class defines enough of the methods
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 690,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 691,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 692, and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 693 [in general,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 690 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 689 are sufficient, if you want the conventional meanings of the comparison operators]
The behavior of the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 680 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 681 operators cannot be customized; also they can be applied to any two objects and never raise an exception
Two more operations with the same syntactic priority,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 698 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 699, are supported by types that are iterable or implement the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6900 method.
Các loại số — def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
901, def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
902, def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
903¶
Có ba loại số riêng biệt. số nguyên, số dấu phẩy động và số phức. Ngoài ra, Booleans là một kiểu con của số nguyên. Số nguyên có độ chính xác không giới hạn. Số dấu phẩy động thường được triển khai bằng cách sử dụng double trong C; . Số phức có phần thực và phần ảo, mỗi phần là một số dấu chấm động. Để trích xuất các phần này từ một số phức z, hãy sử dụng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6905 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6906. [Thư viện chuẩn bao gồm các loại số bổ sung
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6907, dành cho số hữu tỉ và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6908, dành cho số dấu phẩy động với độ chính xác do người dùng xác định. ]
Numbers are created by numeric literals or as the result of built-in functions and operators. Các số nguyên không trang trí [bao gồm cả số hex, bát phân và nhị phân] mang lại số nguyên. Chữ số có chứa dấu thập phân hoặc dấu mũ mang lại số dấu phẩy động. Việc thêm
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6909 hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6910 vào một chữ số sẽ tạo ra một số ảo [một số phức có phần thực bằng 0] mà bạn có thể thêm vào một số nguyên hoặc dấu phẩy động để có được một số phức có phần thực và phần ảo
Python hỗ trợ đầy đủ số học hỗn hợp. when a binary arithmetic operator has operands of different numeric types, the operand with the “narrower” type is widened to that of the other, where integer is narrower than floating point, which is narrower than complex. A comparison between numbers of different types behaves as though the exact values of those numbers were being compared. 2
Các hàm tạo
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6911,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6912 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6913 có thể được sử dụng để tạo các số thuộc một loại cụ thể
Tất cả các loại số [ngoại trừ phức tạp] đều hỗ trợ các phép toán sau [để biết mức độ ưu tiên của các phép toán, hãy xem Mức độ ưu tiên của toán tử ].
Hoạt động
Kết quả
ghi chú
tài liệu đầy đủ
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6914
tổng của x và y
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6915
sự khác biệt của x và y
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6916
sản phẩm của x và y
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6917
quotient of x and y
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6918
thương số sàn của x và y
[1]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6919
phần còn lại của
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6917
[2]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6921
x negated
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6922
x unchanged
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6923
giá trị tuyệt đối hoặc độ lớn của x
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6924
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6925
x converted to integer
[3][6]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6911
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6927
x được chuyển đổi thành dấu phẩy động
[4][6]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6912
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6929
số phức có phần thực là phần ảo. tôi mặc định là không
[6]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6913
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6931
liên hợp của số phức c
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6932
cặp
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6933
[2]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6934
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6935
x to the power y
[5]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6936
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6937
x to the power y
[5]
ghi chú
Còn gọi là phép chia số nguyên. Giá trị kết quả là một số nguyên, mặc dù loại kết quả không nhất thiết phải là int. Kết quả luôn được làm tròn về phía âm vô cùng.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
938 làdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
42,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
940 làdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
941,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
942 làdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
941 vàdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
944 làdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
42Không dành cho số phức. Thay vào đó hãy chuyển đổi thành float bằng cách sử dụng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
924 nếu thích hợpConversion from floating point to integer may round or truncate as in C; see functions
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
947 anddef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
948 for well-defined conversionsfloat cũng chấp nhận các chuỗi “nan” và “inf” với tiền tố tùy chọn “+” hoặc “-” cho Không phải là Số [NaN] và vô cực dương hoặc âm
Python định nghĩa
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
949 vàdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
950 làdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
55, như thường thấy đối với các ngôn ngữ lập trìnhCác chữ số được chấp nhận bao gồm các chữ số
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
42 đếndef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
953 hoặc bất kỳ mã Unicode tương đương nào [điểm mã với thuộc tínhdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
954]Xem https. //www. unicode. org/Public/14. 0. 0/ucd/extracted/DerivedNumericType. txt để biết danh sách đầy đủ các điểm mã với thuộc tính
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
954
All
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6956 types [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6901 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6902] also include the following operations
Hoạt động
Kết quả
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6959
x bị cắt ngắn thành
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6960
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6961
x rounded to n digits, rounding half to even. If n is omitted, it defaults to 0
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6962
the greatest
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6960 '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6 964
the least
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6960 >= x
For additional numeric operations see the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6966 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6967 modules
Bitwise Operations on Integer Types¶
Bitwise operations only make sense for integers. The result of bitwise operations is calculated as though carried out in two’s complement with an infinite number of sign bits
The priorities of the binary bitwise operations are all lower than the numeric operations and higher than the comparisons; the unary operation
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6968 has the same priority as the other unary numeric operations [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6969 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6970]
This table lists the bitwise operations sorted in ascending priority
Hoạt động
Kết quả
ghi chú
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6971
bitwise or of x and y
[4]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6972
bitwise exclusive or of x and y
[4]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6973
bitwise và của x và y
[4]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6974
x shifted left by n bits
[1][2]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6975
x shifted right by n bits
[1][3]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6976
the bits of x inverted
ghi chú
Negative shift counts are illegal and cause a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
977 to be raisedA left shift by n bits is equivalent to multiplication by
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
978A right shift by n bits is equivalent to floor division by
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
978Performing these calculations with at least one extra sign extension bit in a finite two’s complement representation [a working bit-width of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
980 or more] is sufficient to get the same result as if there were an infinite number of sign bits
Additional Methods on Integer Types¶
The int type implements the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6981 abstract base class . In addition, it provides a few more methods. int. bit_length[] ¶
Return the number of bits necessary to represent an integer in binary, excluding the sign and leading zeros
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 651
More precisely, if
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6982 is nonzero, then
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6983 is the unique positive integer
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6984 such that
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6985. Equivalently, when
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6923 is small enough to have a correctly rounded logarithm, then
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6987. If
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6982 is zero, then
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6983 returns
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 642
Equivalent to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
New in version 3. 1
int. bit_count[] ¶Return the number of ones in the binary representation of the absolute value of the integer. This is also known as the population count. Example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69
Equivalent to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 663
New in version 3. 10
int. to_bytes[length=1 , byteorder='big' , * , signed=False] ¶Return an array of bytes representing an integer
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 664
The integer is represented using length bytes, and defaults to 1. An
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6991 is raised if the integer is not representable with the given number of bytes
The byteorder argument determines the byte order used to represent the integer, and defaults to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6992. If byteorder is
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6992, the most significant byte is at the beginning of the byte array. If byteorder is
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6994, the most significant byte is at the end of the byte array
The signed argument determines whether two’s complement is used to represent the integer. If signed is
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 and a negative integer is given, an
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6991 is raised. The default value for signed is
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638
The default values can be used to conveniently turn an integer into a single byte object. However, when using the default arguments, don’t try to convert a value greater than 255 or you’ll get an
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6991
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 673
Equivalent to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 674
New in version 3. 2
Đã thay đổi trong phiên bản 3. 11. Added default argument values for
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6999 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66300. classmethod int. from_bytes[bytes , byteorder='big' , * , signed=False] ¶
Return the integer represented by the given array of bytes
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 677
The argument bytes must either be a bytes-like object or an iterable producing bytes.
The byteorder argument determines the byte order used to represent the integer, and defaults to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6992. If byteorder is
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6992, the most significant byte is at the beginning of the byte array. If byteorder is
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6994, the most significant byte is at the end of the byte array. To request the native byte order of the host system, use
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66304 as the byte order value
The signed argument indicates whether two’s complement is used to represent the integer
Equivalent to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 682
New in version 3. 2
Changed in version 3. 11. Added default argument value for
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66300. int. as_integer_ratio[] ¶
Return a pair of integers whose ratio is exactly equal to the original integer and with a positive denominator. The integer ratio of integers [whole numbers] is always the integer as the numerator and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 655 as the denominator
New in version 3. 8
Additional Methods on Float¶
The float type implements the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6956 abstract base class . float also has the following additional methods. float. as_integer_ratio[] ¶
Return a pair of integers whose ratio is exactly equal to the original float and with a positive denominator. Raises
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6991 on infinities and a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6977 on NaNsfloat. is_integer[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if the float instance is finite with integral value, and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 690
Two methods support conversion to and from hexadecimal strings. Since Python’s floats are stored internally as binary numbers, converting a float to or from a decimal string usually involves a small rounding error. In contrast, hexadecimal strings allow exact representation and specification of floating-point numbers. This can be useful when debugging, and in numerical work
float. hex[] ¶Return a representation of a floating-point number as a hexadecimal string. For finite floating-point numbers, this representation will always include a leading
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66312 and a trailing
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66313 and exponentclassmethod float. fromhex[s] ¶
Class method to return the float represented by a hexadecimal string s. The string s may have leading and trailing whitespace
Note that
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66314 is an instance method, while
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66315 is a class method
A hexadecimal string takes the form
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 60
where the optional
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66316 may by either
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6969 or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6970,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66319 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66320 are strings of hexadecimal digits, and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66321 is a decimal integer with an optional leading sign. Case is not significant, and there must be at least one hexadecimal digit in either the integer or the fraction. This syntax is similar to the syntax specified in section 6. 4. 4. 2 of the C99 standard, and also to the syntax used in Java 1. 5 trở đi. In particular, the output of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66314 is usable as a hexadecimal floating-point literal in C or Java code, and hexadecimal strings produced by C’s
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66323 format character or Java’s
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66324 are accepted by
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66315
Note that the exponent is written in decimal rather than hexadecimal, and that it gives the power of 2 by which to multiply the coefficient. For example, the hexadecimal string
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66326 represents the floating-point number
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66327, or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66328
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 61
Applying the reverse conversion to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66328 gives a different hexadecimal string representing the same number
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 62
Hashing of numeric types¶
For numbers
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6982 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66331, possibly of different types, it’s a requirement that
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66332 whenever
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66333 [see the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66334 method documentation for more details]. For ease of implementation and efficiency across a variety of numeric types [including
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6901,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6902,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6908 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6907] Python’s hash for numeric types is based on a single mathematical function that’s defined for any rational number, and hence applies to all instances of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6901 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6907, and all finite instances of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6902 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6908. Essentially, this function is given by reduction modulo
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66343 for a fixed prime
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66343. The value of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66343 is made available to Python as the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66346 attribute of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66347
CPython implementation detail. Currently, the prime used is
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66348 on machines with 32-bit C longs and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66349 on machines with 64-bit C longs
Here are the rules in detail
If
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6350 is a nonnegative rational number anddef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6351 is not divisible bydef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6343, definedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6353 asdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6354, wheredef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6355 gives the inverse ofdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6351 modulodef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6343If
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6350 is a nonnegative rational number anddef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6351 is divisible bydef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6343 [butdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6361 is not] thendef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6351 has no inverse modulodef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6343 and the rule above doesn’t apply; in this case definedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6353 to be the constant valuedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6365If
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6350 is a negative rational number definedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6353 asdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6368. If the resulting hash isdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
941, replace it withdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6370The particular values
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6365 anddef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6372 are used as hash values for positive infinity or negative infinity [respectively]For a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
903 numberdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6374, the hash values of the real and imaginary parts are combined by computingdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6375, reduced modulodef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6376 so that it lies indef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6377. Again, if the result isdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
941, it’s replaced withdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6370
To clarify the above rules, here’s some example Python code, equivalent to the built-in hash, for computing the hash of a rational number,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6902, or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6903
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 63
Iterator Types¶
Python supports a concept of iteration over containers. This is implemented using two distinct methods; these are used to allow user-defined classes to support iteration. Sequences, described below in more detail, always support the iteration methods
One method needs to be defined for container objects to provide iterable support.
container. __iter__[] ¶Return an iterator object. The object is required to support the iterator protocol described below. If a container supports different types of iteration, additional methods can be provided to specifically request iterators for those iteration types. [An example of an object supporting multiple forms of iteration would be a tree structure which supports both breadth-first and depth-first traversal. ] This method corresponds to the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66382 slot of the type structure for Python objects in the Python/C API.
The iterator objects themselves are required to support the following two methods, which together form the iterator protocol
iterator. __iter__[] ¶Return the iterator object itself. This is required to allow both containers and iterators to be used with the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66383 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 698 statements. This method corresponds to the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66382 slot of the type structure for Python objects in the Python/C API. iterator. __next__[] ¶
Return the next item from the iterator . If there are no further items, raise the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66386 exception. This method corresponds to the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66387 slot of the type structure for Python objects in the Python/C API.
Python defines several iterator objects to support iteration over general and specific sequence types, dictionaries, and other more specialized forms. The specific types are not important beyond their implementation of the iterator protocol
Once an iterator’s
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66388 method raises
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66386, it must continue to do so on subsequent calls. Implementations that do not obey this property are deemed broken
Generator Types¶
Python’s generator s provide a convenient way to implement the iterator protocol. If a container object’s
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66390 method is implemented as a generator, it will automatically return an iterator object [technically, a generator object] supplying the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66390 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66388 methods. Bạn có thể tìm thêm thông tin về trình tạo trong tài liệu về biểu thức năng suất .
Sequence Types — def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
6393, def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
6394, def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
6395¶
There are three basic sequence types. lists, tuples, and range objects. Additional sequence types tailored for processing of binary data and text strings are described in dedicated sections.
Common Sequence Operations¶
The operations in the following table are supported by most sequence types, both mutable and immutable. The
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66396 ABC is provided to make it easier to correctly implement these operations on custom sequence types
This table lists the sequence operations sorted in ascending priority. In the table, s and t are sequences of the same type, n, i, j and k are integers and x is an arbitrary object that meets any type and value restrictions imposed by s
The
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 698 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 699 operations have the same priorities as the comparison operations. The
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6969 [concatenation] and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66400 [repetition] operations have the same priority as the corresponding numeric operations. 3
Hoạt động
Kết quả
ghi chú
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66401
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if an item of s is equal to x, else
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638
[1]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66404
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 if an item of s is equal to x, else
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656
[1]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66407
the concatenation of s and t
[6][7]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66408 or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66409
equivalent to adding s to itself n times
[2][7]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66410
ith item of s, origin 0
[3]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66411
slice of s from i to j
[3][4]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66412
slice of s from i to j with step k
[3][5]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66413
length of s
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66414
smallest item of s
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66415
largest item of s
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66416
index of the first occurrence of x in s [at or after index i and before index j]
[8]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66417
total number of occurrences of x in s
Sequences of the same type also support comparisons. In particular, tuples and lists are compared lexicographically by comparing corresponding elements. This means that to compare equal, every element must compare equal and the two sequences must be of the same type and have the same length. [For full details see Comparisons in the language reference. ]
Forward and reversed iterators over mutable sequences access values using an index. That index will continue to march forward [or backward] even if the underlying sequence is mutated. The iterator terminates only when an
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66418 or a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66386 is encountered [or when the index drops below zero]
ghi chú
While the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
98 anddef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
99 operations are used only for simple containment testing in the general case, some specialised sequences [such asdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6422,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6423 anddef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6424] also use them for subsequence testingdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
4Values of n less than
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
42 are treated asdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
42 [which yields an empty sequence of the same type as s]. Note that items in the sequence s are not copied; they are referenced multiple times. This often haunts new Python programmers; considerdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
5Điều đã xảy ra là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6427 là danh sách một phần tử chứa danh sách trống, vì vậy cả ba phần tử củadef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6428 đều là tham chiếu đến danh sách trống duy nhất này. Modifying any of the elements ofdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6429 modifies this single list. You can create a list of different lists this waydef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6Further explanation is available in the FAQ entry How do I create a multidimensional list? .
If i or j is negative, the index is relative to the end of sequence s.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6430 ordef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6431 is substituted. But note thatdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6432 is stilldef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
42The slice of s from i to j is defined as the sequence of items with index k such that
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6434. If i or j is greater thandef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6413, usedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6413. If i is omitted ordef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
31, usedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
42. If j is omitted ordef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
31, usedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6413. If i is greater than or equal to j, the slice is emptyThe slice of s from i to j with step k is defined as the sequence of items with index
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6441 such thatdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6442. In other words, the indices aredef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6443,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6444,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6445,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6446 and so on, stopping when j is reached [but never including j]. When k is positive, i and j are reduced todef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6413 if they are greater. When k is negative, i and j are reduced todef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6448 if they are greater. If i or j are omitted ordef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
31, they become “end” values [which end depends on the sign of k]. Note, k cannot be zero. If k isdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
31, it is treated likedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
55Concatenating immutable sequences always results in a new object. This means that building up a sequence by repeated concatenation will have a quadratic runtime cost in the total sequence length. To get a linear runtime cost, you must switch to one of the alternatives below
if concatenating
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6422 objects, you can build a list and usedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6453 at the end or else write to andef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6454 instance and retrieve its value when completeif concatenating
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6423 objects, you can similarly usedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6456 ordef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6457, or you can do in-place concatenation with adef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6424 object.def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6424 objects are mutable and have an efficient overallocation mechanismif concatenating
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6394 objects, extend adef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6393 insteadfor other types, investigate the relevant class documentation
Some sequence types [such as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6395] only support item sequences that follow specific patterns, and hence don’t support sequence concatenation or repetitiondef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6463 raisesdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
977 when x is not found in s. Not all implementations support passing the additional arguments i and j. These arguments allow efficient searching of subsections of the sequence. Passing the extra arguments is roughly equivalent to usingdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6465, only without copying any data and with the returned index being relative to the start of the sequence rather than the start of the slice
Immutable Sequence Types¶
The only operation that immutable sequence types generally implement that is not also implemented by mutable sequence types is support for the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66466 built-in
This support allows immutable sequences, such as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66394 instances, to be used as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66468 keys and stored in
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66469 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66470 instances
Attempting to hash an immutable sequence that contains unhashable values will result in
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 688
Mutable Sequence Types¶
The operations in the following table are defined on mutable sequence types. The
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66472 ABC is provided to make it easier to correctly implement these operations on custom sequence types
In the table s is an instance of a mutable sequence type, t is any iterable object and x is an arbitrary object that meets any type and value restrictions imposed by s [for example,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66424 only accepts integers that meet the value restriction
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66474]
Hoạt động
Kết quả
ghi chú
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66475
item i of s is replaced by x
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66476
slice of s from i to j is replaced by the contents of the iterable t
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66477
same as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66478
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66479
the elements of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66412 are replaced by those of t
[1]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66481
removes the elements of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66412 from the list
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66483
appends x to the end of the sequence [same as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66484]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66485
removes all items from s [same as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66486]
[5]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66487
creates a shallow copy of s [same as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66488]
[5]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66489 hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66490
extends s with the contents of t [for the most part the same as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66491]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66492
updates s with its contents repeated n times
[6]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66493
inserts x into s at the index given by i [same as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66494]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66495 or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66496
retrieves the item at i and also removes it from s
[2]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66497
remove the first item from s where
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66410 is equal to x
[3]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66499
reverses the items of s in place
[4]
ghi chú
t must have the same length as the slice it is replacing
The optional argument i defaults to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
941, so that by default the last item is removed and returneddef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7301 raisesdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
977 when x is not found in sThe
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7303 method modifies the sequence in place for economy of space when reversing a large sequence. To remind users that it operates by side effect, it does not return the reversed sequencedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7304 anddef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7305 are included for consistency with the interfaces of mutable containers that don’t support slicing operations [such asdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6468 anddef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6469].def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7305 is not part of thedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6472 ABC, but most concrete mutable sequence classes provide itNew in version 3. 3.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7304 anddef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7305 methods.The value n is an integer, or an object implementing
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7312. Zero and negative values of n clear the sequence. Items in the sequence are not copied; they are referenced multiple times, as explained fordef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6408 under Common Sequence Operations .
Lists¶
Lists are mutable sequences, typically used to store collections of homogeneous items [where the precise degree of similarity will vary by application]
class list[[iterable]] ¶Lists may be constructed in several ways
Using a pair of square brackets to denote the empty list.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
49Using square brackets, separating items with commas.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7315,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7316Using a list comprehension.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7317Using the type constructor.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7318 ordef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7319
The constructor builds a list whose items are the same and in the same order as iterable’s items. iterable may be either a sequence, a container that supports iteration, or an iterator object. If iterable is already a list, a copy is made and returned, similar to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67320. For example,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67321 returns
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67322 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67323 returns
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67324. If no argument is given, the constructor creates a new empty list,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 649
Many other operations also produce lists, including the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67326 built-in
Lists implement all of the common and mutable sequence operations. Lists also provide the following additional method.
sort[* , key=None , reverse=False] ¶This method sorts the list in place, using only
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 674 comparisons between items. Exceptions are not suppressed - if any comparison operations fail, the entire sort operation will fail [and the list will likely be left in a partially modified state]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67328 accepts two arguments that can only be passed by keyword [ keyword-only arguments ].
key specifies a function of one argument that is used to extract a comparison key from each list element [for example,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67329]. The key corresponding to each item in the list is calculated once and then used for the entire sorting process. The default value of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631 means that list items are sorted directly without calculating a separate key value
The
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67331 utility is available to convert a 2. x style cmp function to a key function
đảo ngược là một giá trị boolean. If set to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656, then the list elements are sorted as if each comparison were reversed
This method modifies the sequence in place for economy of space when sorting a large sequence. To remind users that it operates by side effect, it does not return the sorted sequence [use
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67326 to explicitly request a new sorted list instance]
The
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67328 method is guaranteed to be stable. A sort is stable if it guarantees not to change the relative order of elements that compare equal — this is helpful for sorting in multiple passes [for example, sort by department, then by salary grade]
For sorting examples and a brief sorting tutorial, see Sorting HOW TO .
CPython implementation detail. While a list is being sorted, the effect of attempting to mutate, or even inspect, the list is undefined. The C implementation of Python makes the list appear empty for the duration, and raises
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6977 if it can detect that the list has been mutated during a sort
Tuples¶
Tuples are immutable sequences, typically used to store collections of heterogeneous data [such as the 2-tuples produced by the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67336 built-in]. Tuples are also used for cases where an immutable sequence of homogeneous data is needed [such as allowing storage in a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66469 or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66468 instance]class tuple[[iterable]] ¶
Tuples may be constructed in a number of ways
Using a pair of parentheses to denote the empty tuple.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
48Using a trailing comma for a singleton tuple.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7340 ordef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7341Separating items with commas.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7342 ordef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7343Using the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7344 built-in.def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7344 ordef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7346
The constructor builds a tuple whose items are the same and in the same order as iterable’s items. iterable may be either a sequence, a container that supports iteration, or an iterator object. If iterable is already a tuple, it is returned unchanged. For example,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67347 returns
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67348 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67349 returns
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67350. If no argument is given, the constructor creates a new empty tuple,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 648
Note that it is actually the comma which makes a tuple, not the parentheses. The parentheses are optional, except in the empty tuple case, or when they are needed to avoid syntactic ambiguity. For example,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67352 is a function call with three arguments, while
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67353 is a function call with a 3-tuple as the sole argument
Tuples implement all of the common sequence operations.
For heterogeneous collections of data where access by name is clearer than access by index,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67354 may be a more appropriate choice than a simple tuple object
Ranges¶
The
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66395 type represents an immutable sequence of numbers and is commonly used for looping a specific number of times in
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66383 loopsclass range[stop] ¶ class range[start , stop[ , step]]
The arguments to the range constructor must be integers [either built-in
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6901 or any object that implements the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67312 special method]. If the step argument is omitted, it defaults to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 655. If the start argument is omitted, it defaults to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 642. If step is zero,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6977 is raised
For a positive step, the contents of a range
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67362 are determined by the formula
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67363 where
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67364 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67365
For a negative step, the contents of the range are still determined by the formula
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67363, but the constraints are
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67364 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67368
A range object will be empty if
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67369 does not meet the value constraint. Ranges do support negative indices, but these are interpreted as indexing from the end of the sequence determined by the positive indices
Ranges containing absolute values larger than
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67370 are permitted but some features [such as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67371] may raise
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6991
Range examples
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67
Ranges implement all of the common sequence operations except concatenation and repetition [due to the fact that range objects can only represent sequences that follow a strict pattern and repetition and concatenation will usually violate that pattern].
start ¶The value of the start parameter [or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 642 if the parameter was not supplied]stop ¶
The value of the stop parameter
step ¶Giá trị của tham số bước [hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 655 nếu tham số không được cung cấp]
The advantage of the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66395 type over a regular
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66393 or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66394 is that a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66395 object will always take the same [small] amount of memory, no matter the size of the range it represents [as it only stores the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67379,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67380 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67381 values, calculating individual items and subranges as needed]
Range objects implement the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66396 ABC, and provide features such as containment tests, element index lookup, slicing and support for negative indices [see Sequence Types — list, tuple, range ].
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68
Testing range objects for equality with
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 678 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 679 compares them as sequences. That is, two range objects are considered equal if they represent the same sequence of values. [Note that two range objects that compare equal might have different
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67379,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67380 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67381 attributes, for example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67388 or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67389. ]
Changed in version 3. 2. Implement the Sequence ABC. Support slicing and negative indices. Test
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6901 objects for membership in constant time instead of iterating through all items.
Changed in version 3. 3. Define ‘==’ and ‘. =’ to compare range objects based on the sequence of values they define [instead of comparing based on object identity].
New in version 3. 3. The
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67379,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67380 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67381 attributes.
See also
The linspace recipe shows how to implement a lazy version of range suitable for floating point applications
Text Sequence Type — def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
6422¶
Textual data in Python is handled with
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66422 objects, or strings. Strings are immutable sequences of Unicode code points. String literals are written in a variety of ways.
Single quotes.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7396Double quotes.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7397Triple quoted.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7398,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7399
Triple quoted strings may span multiple lines - all associated whitespace will be included in the string literal
String literals that are part of a single expression and have only whitespace between them will be implicitly converted to a single string literal. That is,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67400
See String and Bytes literals for more about the various forms of string literal, including supported escape sequences, and the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67362 [“raw”] prefix that disables most escape sequence processing.
Strings may also be created from other objects using the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66422 constructor
Since there is no separate “character” type, indexing a string produces strings of length 1. That is, for a non-empty string s,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67403
There is also no mutable string type, but
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66453 or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66454 can be used to efficiently construct strings from multiple fragments
Changed in version 3. 3. For backwards compatibility with the Python 2 series, the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67406 prefix is once again permitted on string literals. It has no effect on the meaning of string literals and cannot be combined with the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67362 prefix. class str[object=''] ¶ class str[object=b'' , encoding='utf-8' , errors='strict']
Return a string version of object. If object is not provided, returns the empty string. Otherwise, the behavior of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 633 depends on whether encoding or errors is given, as follows.
If neither encoding nor errors is given,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67409 returns
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67410, which is the “informal” or nicely printable string representation of object. For string objects, this is the string itself. If object does not have a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67411 method, then
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 633 falls back to returning
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67413
If at least one of encoding or errors is given, object should be a bytes-like object [e. g.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66424]. In this case, if object is a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 [or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66424] object, then
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67418 is equivalent to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67419. Mặt khác, đối tượng byte bên dưới đối tượng bộ đệm được lấy trước khi gọi
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67420. See Binary Sequence Types — bytes, bytearray, memoryview and Buffer Protocol for information on buffer objects.
Passing a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 object to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 633 without the encoding or errors arguments falls under the first case of returning the informal string representation [see also the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67423 command-line option to Python]. For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69
For more information on the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66422 class and its methods, see Text Sequence Type — str and the String Methods section below. To output formatted strings, see the Formatted string literals and Format String Syntax sections. In addition, see the Text Processing Services section.
String Methods¶
Strings implement all of the common sequence operations, along with the additional methods described below.
Strings also support two styles of string formatting, one providing a large degree of flexibility and customization [see
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67425, Format String Syntax and Custom String Formatting ] and the other based on C
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67426 style formatting that handles a narrower range of types and is slightly harder to use correctly, but is often faster for the cases it can handle [ printf-style String Formatting ].
The Text Processing Services section of the standard library covers a number of other modules that provide various text related utilities [including regular expression support in the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67427 module]. str. capitalize[] ¶
Return a copy of the string with its first character capitalized and the rest lowercased
Changed in version 3. 8. The first character is now put into titlecase rather than uppercase. This means that characters like digraphs will only have their first letter capitalized, instead of the full character.
str. casefold[] ¶Return a casefolded copy of the string. Casefolded strings may be used for caseless matching
Casefolding is similar to lowercasing but more aggressive because it is intended to remove all case distinctions in a string. For example, the German lowercase letter
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67428 is equivalent to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67429. Since it is already lowercase,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67430 would do nothing to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67428;
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67432 converts it to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67429
The casefolding algorithm is described in section 3. 13 of the Unicode Standard
New in version 3. 3
str. center[width[ , fillchar]] ¶Return centered in a string of length width. Padding is done using the specified fillchar [default is an ASCII space]. The original string is returned if width is less than or equal to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66413str. count[sub[ , start[ , end]]] ¶
Return the number of non-overlapping occurrences of substring sub in the range [start, end]. Optional arguments start and end are interpreted as in slice notation
If sub is empty, returns the number of empty strings between characters which is the length of the string plus one
str. encode[encoding='utf-8' , errors='strict'] ¶Return the string encoded to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423
encoding defaults to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67436; see Standard Encodings for possible values.
errors controls how encoding errors are handled. If
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67437 [the default], a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67438 exception is raised. Other possible values are
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67439,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67440,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67441,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67442 and any other name registered via
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67443. See Error Handlers for details.
For performance reasons, the value of errors is not checked for validity unless an encoding error actually occurs, Python Development Mode is enabled or a debug build is used.
Changed in version 3. 1. Added support for keyword arguments.
Changed in version 3. 9. The value of the errors argument is now checked in Python Development Mode and in debug mode .
str. endswith[suffix[ , start[ , end]]] ¶Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if the string ends with the specified suffix, otherwise return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638. suffix can also be a tuple of suffixes to look for. With optional start, test beginning at that position. With optional end, stop comparing at that positionstr. expandtabs[tabsize=8] ¶
Return a copy of the string where all tab characters are replaced by one or more spaces, depending on the current column and the given tab size. Tab positions occur every tabsize characters [default is 8, giving tab positions at columns 0, 8, 16 and so on]. To expand the string, the current column is set to zero and the string is examined character by character. If the character is a tab [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67446], one or more space characters are inserted in the result until the current column is equal to the next tab position. [The tab character itself is not copied. ] If the character is a newline [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67447] or return [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67448], it is copied and the current column is reset to zero. Any other character is copied unchanged and the current column is incremented by one regardless of how the character is represented when printed
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 690str. find[sub[ , start[ , end]]] ¶
Return the lowest index in the string where substring sub is found within the slice
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67449. Optional arguments start and end are interpreted as in slice notation. Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6941 if sub is not found
Note
The
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67451 method should be used only if you need to know the position of sub. To check if sub is a substring or not, use the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 698 operator
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 691str. format[*args , **kwargs] ¶
Perform a string formatting operation. The string on which this method is called can contain literal text or replacement fields delimited by braces
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 650. Each replacement field contains either the numeric index of a positional argument, or the name of a keyword argument. Returns a copy of the string where each replacement field is replaced with the string value of the corresponding argument
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 692
See Format String Syntax for a description of the various formatting options that can be specified in format strings.
Note
When formatting a number [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6901,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6902,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6903,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6908 and subclasses] with the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66351 type [ex.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67459], the function temporarily sets the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67460 locale to the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67461 locale to decode
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67462 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67463 fields of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67464 if they are non-ASCII or longer than 1 byte, and the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67461 locale is different than the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67460 locale. This temporary change affects other threads
Changed in version 3. 7. When formatting a number with the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66351 type, the function sets temporarily the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67460 locale to the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67461 locale in some cases. str. format_map[mapping] ¶
Tương tự như
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67470, ngoại trừ việc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67471 được sử dụng trực tiếp và không được sao chép sang
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66468. This is useful if for example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67471 is a dict subclass
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 693
New in version 3. 2
str. index[sub[ , start[ , end]]] ¶Like
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67451, but raise
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6977 when the substring is not foundstr. isalnum[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if all characters in the string are alphanumeric and there is at least one character,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise. A character
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67478 is alphanumeric if one of the following returns
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67480,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67481,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67482, or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67483str. isalpha[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if all characters in the string are alphabetic and there is at least one character,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise. Alphabetic characters are those characters defined in the Unicode character database as “Letter”, i. e. , those with general category property being one of “Lm”, “Lt”, “Lu”, “Ll”, or “Lo”. Note that this is different from the “Alphabetic” property defined in the Unicode Standardstr. isascii[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if the string is empty or all characters in the string are ASCII,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise. ASCII characters have code points in the range U+0000-U+007F
New in version 3. 7
str. isdecimal[] ¶Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if all characters in the string are decimal characters and there is at least one character,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise. Decimal characters are those that can be used to form numbers in base 10, e. g. U+0660, ARABIC-INDIC DIGIT ZERO. Formally a decimal character is a character in the Unicode General Category “Nd”str. isdigit[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if all characters in the string are digits and there is at least one character,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise. Digits include decimal characters and digits that need special handling, such as the compatibility superscript digits. This covers digits which cannot be used to form numbers in base 10, like the Kharosthi numbers. Formally, a digit is a character that has the property value Numeric_Type=Digit or Numeric_Type=Decimalstr. isidentifier[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if the string is a valid identifier according to the language definition, section Identifiers and keywords .
Call
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67493 to test whether string
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67494 is a reserved identifier, such as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67495 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67496
Example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 694str. islower[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if all cased characters 4 in the string are lowercase and there is at least one cased character,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwisestr. isnumeric[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if all characters in the string are numeric characters, and there is at least one character,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise. Numeric characters include digit characters, and all characters that have the Unicode numeric value property, e. g. U+2155, VULGAR FRACTION ONE FIFTH. Formally, numeric characters are those with the property value Numeric_Type=Digit, Numeric_Type=Decimal or Numeric_Type=Numericstr. isprintable[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if all characters in the string are printable or the string is empty,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise. Nonprintable characters are those characters defined in the Unicode character database as “Other” or “Separator”, excepting the ASCII space [0x20] which is considered printable. [Lưu ý rằng các ký tự có thể in được trong ngữ cảnh này là những ký tự không được thoát khi
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 632 được gọi trên một chuỗi. It has no bearing on the handling of strings written to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67704 or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67705. ]str. isspace[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if there are only whitespace characters in the string and there is at least one character,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise
A character is whitespace if in the Unicode character database [see
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67708], either its general category is
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67709 [“Separator, space”], or its bidirectional class is one of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67710,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67711, or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67712str. istitle[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if the string is a titlecased string and there is at least one character, for example uppercase characters may only follow uncased characters and lowercase characters only cased ones. Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwisestr. isupper[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if all cased characters 4 in the string are uppercase and there is at least one cased character,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 695str. join[iterable] ¶
Return a string which is the concatenation of the strings in iterable. A
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 688 will be raised if there are any non-string values in iterable, including
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 objects. The separator between elements is the string providing this methodstr. ljust[width[ , fillchar]] ¶
Return the string left justified in a string of length width. Padding is done using the specified fillchar [default is an ASCII space]. The original string is returned if width is less than or equal to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66413str. lower[] ¶
Return a copy of the string with all the cased characters 4 converted to lowercase
The lowercasing algorithm used is described in section 3. 13 of the Unicode Standard
str. lstrip[[chars]] ¶Return a copy of the string with leading characters removed. The chars argument is a string specifying the set of characters to be removed. If omitted or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631, the chars argument defaults to removing whitespace. The chars argument is not a prefix; rather, all combinations of its values are stripped
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 696
See
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67721 for a method that will remove a single prefix string rather than all of a set of characters. For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 697static str. maketrans[x[ , y[ , z]]] ¶
This static method returns a translation table usable for
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67722
If there is only one argument, it must be a dictionary mapping Unicode ordinals [integers] or characters [strings of length 1] to Unicode ordinals, strings [of arbitrary lengths] or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631. Character keys will then be converted to ordinals
If there are two arguments, they must be strings of equal length, and in the resulting dictionary, each character in x will be mapped to the character at the same position in y. If there is a third argument, it must be a string, whose characters will be mapped to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631 in the resultstr. partition[sep] ¶
Split the string at the first occurrence of sep, and return a 3-tuple containing the part before the separator, the separator itself, and the part after the separator. If the separator is not found, return a 3-tuple containing the string itself, followed by two empty strings
str. removeprefix[prefix , /] ¶If the string starts with the prefix string, return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67725. Otherwise, return a copy of the original string
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 698
New in version 3. 9
str. hậu tố loại bỏ[hậu tố , /]¶If the string ends with the suffix string and that suffix is not empty, return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67726. Otherwise, return a copy of the original string
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 699
New in version 3. 9
str. replace[old , new[ , count]] ¶Return a copy of the string with all occurrences of substring old replaced by new. If the optional argument count is given, only the first count occurrences are replaced
str. rfind[sub[ , start[ , end]]] ¶Return the highest index in the string where substring sub is found, such that sub is contained within
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67449. Optional arguments start and end are interpreted as in slice notation. Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6941 on failurestr. rindex[sub[ , start[ , end]]] ¶
Like
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67729 but raises
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6977 when the substring sub is not foundstr. rjust[width[ , fillchar]] ¶
Return the string right justified in a string of length width. Padding is done using the specified fillchar [default is an ASCII space]. The original string is returned if width is less than or equal to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66413str. rpartition[sep] ¶
Split the string at the last occurrence of sep, and return a 3-tuple containing the part before the separator, the separator itself, and the part after the separator. If the separator is not found, return a 3-tuple containing two empty strings, followed by the string itself
str. rsplit[sep=None , maxsplit=- 1] ¶Return a list of the words in the string, using sep as the delimiter string. If maxsplit is given, at most maxsplit splits are done, the rightmost ones. If sep is not specified or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631, any whitespace string is a separator. Except for splitting from the right,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67733 behaves like
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67734 which is described in detail belowstr. rstrip[[chars]] ¶
Return a copy of the string with trailing characters removed. The chars argument is a string specifying the set of characters to be removed. If omitted or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631, the chars argument defaults to removing whitespace. The chars argument is not a suffix; rather, all combinations of its values are stripped
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6630
See
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67736 for a method that will remove a single suffix string rather than all of a set of characters. For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6631str. split[sep=None , maxsplit=- 1] ¶
Return a list of the words in the string, using sep as the delimiter string. If maxsplit is given, at most maxsplit splits are done [thus, the list will have at most
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67737 elements]. If maxsplit is not specified or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6941, then there is no limit on the number of splits [all possible splits are made]
If sep is given, consecutive delimiters are not grouped together and are deemed to delimit empty strings [for example,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67739 returns
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67740]. The sep argument may consist of multiple characters [for example,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67741 returns
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67742]. Splitting an empty string with a specified separator returns
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67743
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6632
If sep is not specified or is
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631, a different splitting algorithm is applied. runs of consecutive whitespace are regarded as a single separator, and the result will contain no empty strings at the start or end if the string has leading or trailing whitespace. Consequently, splitting an empty string or a string consisting of just whitespace with a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631 separator returns
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 649
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6633str. splitlines[keepends=False] ¶
Return a list of the lines in the string, breaking at line boundaries. Line breaks are not included in the resulting list unless keepends is given and true
This method splits on the following line boundaries. In particular, the boundaries are a superset of universal newlines .
Representation
Description
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67447
Line Feed
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67448
Carriage Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67749
Carriage Return + Line Feed
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67750 or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67751
Line Tabulation
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67752 or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67753
Form Feed
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67754
File Separator
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67755
Group Separator
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67756
Record Separator
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67757
Next Line [C1 Control Code]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67758
Line Separator
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67759
Paragraph Separator
Changed in version 3. 2.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67750 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67752 added to list of line boundaries.
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6634
Unlike
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67734 when a delimiter string sep is given, this method returns an empty list for the empty string, and a terminal line break does not result in an extra line
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6635
For comparison,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67763 gives
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6636str. startswith[prefix[ , start[ , end]]] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if string starts with the prefix, otherwise return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638. prefix can also be a tuple of prefixes to look for. With optional start, test string beginning at that position. With optional end, stop comparing string at that positionstr. strip[[chars]] ¶
Return a copy of the string with the leading and trailing characters removed. The chars argument is a string specifying the set of characters to be removed. If omitted or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631, the chars argument defaults to removing whitespace. The chars argument is not a prefix or suffix; rather, all combinations of its values are stripped
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6637
The outermost leading and trailing chars argument values are stripped from the string. Các ký tự bị xóa khỏi đầu cuối cho đến khi đạt đến một ký tự chuỗi không có trong bộ ký tự trong ký tự. A similar action takes place on the trailing end. For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6638str. swapcase[] ¶
Return a copy of the string with uppercase characters converted to lowercase and vice versa. Note that it is not necessarily true that
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67767str. title[] ¶
Return a titlecased version of the string where words start with an uppercase character and the remaining characters are lowercase
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6639
The algorithm uses a simple language-independent definition of a word as groups of consecutive letters. The definition works in many contexts but it means that apostrophes in contractions and possessives form word boundaries, which may not be the desired result
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6640
The
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67768 function does not have this problem, as it splits words on spaces only
Alternatively, a workaround for apostrophes can be constructed using regular expressions
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6641str. translate[table] ¶
Return a copy of the string in which each character has been mapped through the given translation table. The table must be an object that implements indexing via
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67769, typically a mapping or sequence . When indexed by a Unicode ordinal [an integer], the table object can do any of the following. return a Unicode ordinal or a string, to map the character to one or more other characters; return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631, to delete the character from the return string; or raise a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67771 exception, to map the character to itself.
You can use
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67772 to create a translation map from character-to-character mappings in different formats
See also the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67773 module for a more flexible approach to custom character mappingsstr. upper[] ¶
Return a copy of the string with all the cased characters 4 converted to uppercase. Note that
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67774 might be
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 if
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67494 contains uncased characters or if the Unicode category of the resulting character[s] is not “Lu” [Letter, uppercase], but e. g. “Lt” [Letter, titlecase]
The uppercasing algorithm used is described in section 3. 13 of the Unicode Standard
str. zfill[width] ¶Return a copy of the string left filled with ASCII
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67777 digits to make a string of length width. A leading sign prefix [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67778/
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67779] is handled by inserting the padding after the sign character rather than before. The original string is returned if width is less than or equal to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66413
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6642
def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
7426-style String Formatting¶
Note
The formatting operations described here exhibit a variety of quirks that lead to a number of common errors [such as failing to display tuples and dictionaries correctly]. Using the newer formatted string literals , the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67425 interface, or template strings may help avoid these errors. Each of these alternatives provides their own trade-offs and benefits of simplicity, flexibility, and/or extensibility.
String objects have one unique built-in operation. the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67783 operator [modulo]. This is also known as the string formatting or interpolation operator. Given
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67784 [where format is a string],
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67783 conversion specifications in format are replaced with zero or more elements of values. The effect is similar to using the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67786 in the C language
If format requires a single argument, values may be a single non-tuple object. 5 Otherwise, values must be a tuple with exactly the number of items specified by the format string, or a single mapping object [for example, a dictionary]
A conversion specifier contains two or more characters and has the following components, which must occur in this order
The
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7787 character, which marks the start of the specifierKhóa ánh xạ [tùy chọn], bao gồm một chuỗi ký tự trong ngoặc đơn [ví dụ:
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7788]Conversion flags [optional], which affect the result of some conversion types
Minimum field width [optional]. Nếu được chỉ định là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7789 [dấu hoa thị], chiều rộng thực tế được đọc từ phần tử tiếp theo của bộ giá trị và đối tượng cần chuyển đổi xuất hiện sau chiều rộng trường tối thiểu và độ chính xác tùy chọnPrecision [optional], given as a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7790 [dot] followed by the precision. If specified asdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7789 [an asterisk], the actual precision is read from the next element of the tuple in values, and the value to convert comes after the precisionCông cụ sửa đổi độ dài [tùy chọn]
Conversion type
When the right argument is a dictionary [or other mapping type], then the formats in the string must include a parenthesised mapping key into that dictionary inserted immediately after the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67787 character. The mapping key selects the value to be formatted from the mapping. For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6643
In this case no
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66400 specifiers may occur in a format [since they require a sequential parameter list]
The conversion flag characters are
Lá cờ
Meaning
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67794
Việc chuyển đổi giá trị sẽ sử dụng “hình thức thay thế” [được định nghĩa bên dưới]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67777
The conversion will be zero padded for numeric values
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67779
The converted value is left adjusted [overrides the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67777 conversion if both are given]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67798
[khoảng trắng] Nên để trống trước số dương [hoặc chuỗi trống] được tạo bởi chuyển đổi đã ký
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67778
Ký tự dấu [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67778 hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67779] sẽ đứng trước chuyển đổi [ghi đè cờ “dấu cách”]
Có thể có công cụ sửa đổi độ dài [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68202,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68203 hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68204], nhưng bị bỏ qua vì nó không cần thiết đối với Python – vì vậy e. g.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68205 giống hệt với
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68206
The conversion types are
Conversion
Meaning
ghi chú
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68207
Signed integer decimal
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68208
Signed integer decimal
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68209
Signed octal value
[1]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68210
Obsolete type – it is identical to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68207
[6]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68212
Đã ký thập lục phân [chữ thường]
[2]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68213
Đã ký thập lục phân [chữ hoa]
[2]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68214
Floating point exponential format [lowercase]
[3]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68215
Định dạng số mũ dấu phẩy động [chữ hoa]
[3]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68216
Floating point decimal format
[3]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68217
Floating point decimal format
[3]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68218
Định dạng dấu phẩy động. Sử dụng định dạng số mũ chữ thường nếu số mũ nhỏ hơn -4 hoặc không nhỏ hơn độ chính xác, nếu không thì định dạng thập phân
[4]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68219
Định dạng dấu phẩy động. Sử dụng định dạng số mũ viết hoa nếu số mũ nhỏ hơn -4 hoặc không nhỏ hơn độ chính xác, nếu không thì định dạng thập phân
[4]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68220
Ký tự đơn [chấp nhận số nguyên hoặc chuỗi ký tự đơn]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68221
Chuỗi [chuyển đổi bất kỳ đối tượng Python nào bằng cách sử dụng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 632]
[5]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68223
Chuỗi [chuyển đổi bất kỳ đối tượng Python nào bằng cách sử dụng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 633]
[5]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68225
Chuỗi [chuyển đổi bất kỳ đối tượng Python nào bằng cách sử dụng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68226]
[5]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67787
Không có đối số nào được chuyển đổi, dẫn đến ký tự
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67787 trong kết quả
ghi chú
Dạng thay thế làm cho một bộ xác định bát phân hàng đầu [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8229] được chèn vào trước chữ số đầu tiênDạng thay thế làm cho một
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8230 hoặcdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8231 đứng đầu [tùy thuộc vào việc định dạngdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8212 hoặcdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8213 được sử dụng] được chèn vào trước chữ số đầu tiênDạng thay thế khiến kết quả luôn chứa dấu thập phân, ngay cả khi không có chữ số nào theo sau nó
Độ chính xác xác định số chữ số sau dấu thập phân và mặc định là 6
Dạng thay thế làm cho kết quả luôn chứa dấu thập phân và các số 0 ở cuối không bị xóa như cách khác
Độ chính xác xác định số chữ số có nghĩa trước và sau dấu thập phân và mặc định là 6
Nếu độ chính xác là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8234, đầu ra bị cắt bớt thành ký tựdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8234Xem PEP 237
Vì các chuỗi Python có độ dài rõ ràng, các chuyển đổi của
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68236 không cho rằng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68237 là phần cuối của chuỗi
Đã thay đổi trong phiên bản 3. 1. ______18238 chuyển đổi cho các số có giá trị tuyệt đối trên 1e50 không còn được thay thế bằng chuyển đổi
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68239.
Các loại chuỗi nhị phân — def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
6423, def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
6424, def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
8242¶
Các loại tích hợp cốt lõi để thao tác dữ liệu nhị phân là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66424. Chúng được hỗ trợ bởi
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68242 sử dụng giao thức bộ đệm để truy cập bộ nhớ của các đối tượng nhị phân khác mà không cần tạo bản sao.
Mô-đun
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68246 hỗ trợ lưu trữ hiệu quả các loại dữ liệu cơ bản như số nguyên 32 bit và giá trị nổi chính xác kép IEEE754
Đối tượng byte¶
Các đối tượng byte là các chuỗi bất biến của các byte đơn. Do nhiều giao thức nhị phân chính dựa trên mã hóa văn bản ASCII, các đối tượng byte cung cấp một số phương thức chỉ hợp lệ khi làm việc với dữ liệu tương thích ASCII và có liên quan chặt chẽ với các đối tượng chuỗi theo nhiều cách khác nhau
lớp byte[[nguồn[, encoding[, errors]]]]¶Đầu tiên, cú pháp cho các ký tự byte phần lớn giống như cú pháp cho các ký tự chuỗi, ngoại trừ tiền tố
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68247 được thêm vào
Dấu nháy đơn.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8248Dấu ngoặc kép.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8249Ba trích dẫn.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8250,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8251
Chỉ cho phép các ký tự ASCII theo byte bằng chữ [bất kể mã hóa mã nguồn đã khai báo]. Bất kỳ giá trị nhị phân nào trên 127 phải được nhập vào byte bằng chữ bằng cách sử dụng trình tự thoát thích hợp
Giống như chuỗi ký tự, ký tự byte cũng có thể sử dụng tiền tố
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67362 để vô hiệu hóa quá trình xử lý chuỗi thoát. Xem Chuỗi và ký tự byte để biết thêm về các dạng ký tự byte khác nhau, bao gồm các chuỗi thoát được hỗ trợ.
Mặc dù các ký tự byte và biểu diễn dựa trên văn bản ASCII, nhưng các đối tượng byte thực sự hoạt động giống như các chuỗi số nguyên bất biến, với mỗi giá trị trong chuỗi bị hạn chế sao cho
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68253 [cố gắng vi phạm hạn chế này sẽ kích hoạt
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6977]. Điều này được thực hiện có chủ ý để nhấn mạnh rằng trong khi nhiều định dạng nhị phân bao gồm các phần tử dựa trên ASCII và có thể được thao tác hữu ích với một số thuật toán hướng văn bản, thì điều này thường không xảy ra đối với dữ liệu nhị phân tùy ý [áp dụng một cách mù quáng các thuật toán xử lý văn bản cho các định dạng dữ liệu nhị phân không phải là
Ngoài các dạng chữ, các đối tượng byte có thể được tạo theo một số cách khác
Một đối tượng byte được điền bằng 0 có độ dài được chỉ định.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8255Từ một số nguyên có thể lặp lại.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8256Sao chép dữ liệu nhị phân hiện có thông qua giao thức bộ đệm.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8257
Cũng xem byte tích hợp.
Vì 2 chữ số thập lục phân tương ứng chính xác với một byte đơn, số thập lục phân là định dạng thường được sử dụng để mô tả dữ liệu nhị phân. Theo đó, kiểu bytes có thêm một phương thức lớp để đọc dữ liệu ở định dạng đó
phương pháp phân lớp từ hex[chuỗi]¶Phương thức lớp
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 này trả về một đối tượng byte, giải mã đối tượng chuỗi đã cho. Chuỗi phải chứa hai chữ số thập lục phân trên mỗi byte, bỏ qua khoảng trắng ASCII
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6644
Đã thay đổi trong phiên bản 3. 7. ______18259 hiện bỏ qua tất cả khoảng trắng ASCII trong chuỗi, không chỉ khoảng trắng.
Hàm chuyển đổi ngược tồn tại để chuyển đổi một đối tượng byte thành biểu diễn thập lục phân của nó
hex[[sep[, bytes_per_sep]]]¶Trả về một đối tượng chuỗi chứa hai chữ số thập lục phân cho mỗi byte trong ví dụ
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6645
Nếu bạn muốn làm cho chuỗi hex dễ đọc hơn, bạn có thể chỉ định một tham số sep tách ký tự đơn để đưa vào đầu ra. Theo mặc định, dấu tách này sẽ được bao gồm giữa mỗi byte. Tham số bytes_per_sep tùy chọn thứ hai kiểm soát khoảng cách. Các giá trị dương tính toán vị trí phân cách từ bên phải, các giá trị âm từ bên trái
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6646
Mới trong phiên bản 3. 5
Đã thay đổi trong phiên bản 3. 8. ______18260 hiện hỗ trợ các tham số sep và bytes_per_sep tùy chọn để chèn dấu phân cách giữa các byte trong đầu ra hex.
Vì đối tượng bytes là chuỗi các số nguyên [tương tự như bộ tuple], đối với đối tượng bytes b,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68261 sẽ là số nguyên, trong khi
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68262 sẽ là đối tượng bytes có độ dài 1. [Điều này trái ngược với các chuỗi văn bản, trong đó cả lập chỉ mục và cắt sẽ tạo ra một chuỗi có độ dài 1]
The representation of bytes objects uses the literal format [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68263] since it is often more useful than e. g.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68264. You can always convert a bytes object into a list of integers using
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68265
Bytearray Objects¶
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66424 objects are a mutable counterpart to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 objectsclass bytearray[[source[ , encoding[ , errors]]]] ¶
There is no dedicated literal syntax for bytearray objects, instead they are always created by calling the constructor
Creating an empty instance.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8268Creating a zero-filled instance with a given length.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8269From an iterable of integers.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8270Copying existing binary data via the buffer protocol.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8271
As bytearray objects are mutable, they support the mutable sequence operations in addition to the common bytes and bytearray operations described in Bytes and Bytearray Operations .
Also see the bytearray built-in.
Vì 2 chữ số thập lục phân tương ứng chính xác với một byte đơn, số thập lục phân là định dạng thường được sử dụng để mô tả dữ liệu nhị phân. Accordingly, the bytearray type has an additional class method to read data in that format
phương pháp phân lớp từ hex[chuỗi]¶Phương thức lớp
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66424 này trả về đối tượng bytearray, giải mã đối tượng chuỗi đã cho. Chuỗi phải chứa hai chữ số thập lục phân trên mỗi byte, bỏ qua khoảng trắng ASCII
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6647
Changed in version 3. 7.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68273 now skips all ASCII whitespace in the string, not just spaces.
A reverse conversion function exists to transform a bytearray object into its hexadecimal representation
hex[[sep[, bytes_per_sep]]]¶Trả về một đối tượng chuỗi chứa hai chữ số thập lục phân cho mỗi byte trong ví dụ
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6648
Mới trong phiên bản 3. 5
Changed in version 3. 8. Similar to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68260,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68275 now supports optional sep and bytes_per_sep parameters to insert separators between bytes in the hex output.
Since bytearray objects are sequences of integers [akin to a list], for a bytearray object b,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68261 will be an integer, while
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68262 will be a bytearray object of length 1. [This contrasts with text strings, where both indexing and slicing will produce a string of length 1]
The representation of bytearray objects uses the bytes literal format [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68278] since it is often more useful than e. g.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68279. You can always convert a bytearray object into a list of integers using
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68265
Bytes and Bytearray Operations¶
Both bytes and bytearray objects support the common sequence operations. They interoperate not just with operands of the same type, but with any bytes-like object . Due to this flexibility, they can be freely mixed in operations without causing errors. However, the return type of the result may depend on the order of operands.
Note
Các phương thức trên các đối tượng byte và bytearray không chấp nhận các chuỗi làm đối số của chúng, giống như các phương thức trên các chuỗi không chấp nhận các byte làm đối số của chúng. For example, you have to write
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6649
và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6730
Một số hoạt động byte và bytearray giả sử sử dụng định dạng nhị phân tương thích ASCII và do đó nên tránh khi làm việc với dữ liệu nhị phân tùy ý. Những hạn chế này được đề cập dưới đây
Note
Sử dụng các hoạt động dựa trên ASCII này để thao tác dữ liệu nhị phân không được lưu trữ ở định dạng dựa trên ASCII có thể dẫn đến hỏng dữ liệu
Có thể sử dụng các phương thức sau trên đối tượng byte và bytearray với dữ liệu nhị phân tùy ý
byte. đếm[phụ[ , . start[, end]]]¶bytearray.đếm[phụ[ , start[, end]]]¶Trả về số lần xuất hiện không trùng lặp của subsequence sub trong phạm vi [bắt đầu, kết thúc]. Các đối số tùy chọn bắt đầu và kết thúc được diễn giải như trong ký hiệu lát cắt
Dãy con cần tìm có thể là bất kỳ đối tượng giống như byte hoặc một số nguyên trong khoảng từ 0 đến 255.
If sub is empty, returns the number of empty slices between characters which is the length of the bytes object plus one
Changed in version 3. 3. Also accept an integer in the range 0 to 255 as the subsequence.
bytes. removeprefix[prefix , /] ¶ bytearray. removeprefix[prefix , /] ¶If the binary data starts with the prefix string, return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68281. Otherwise, return a copy of the original binary data
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6731
The prefix may be any bytes-like object .
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
New in version 3. 9
bytes. removesuffix[suffix , /] ¶ bytearray. removesuffix[suffix , /] ¶If the binary data ends with the suffix string and that suffix is not empty, return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68282. Otherwise, return a copy of the original binary data
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6732
Hậu tố có thể là bất kỳ đối tượng giống như byte .
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
New in version 3. 9
bytes. decode[encoding='utf-8' , errors='strict'] ¶ bytearray. decode[encoding='utf-8' , errors='strict'] ¶Return the bytes decoded to a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66422
encoding defaults to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67436; see Standard Encodings for possible values.
errors controls how decoding errors are handled. If
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67437 [the default], a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67438 exception is raised. Other possible values are
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67439,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67440, and any other name registered via
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67443. See Error Handlers for details.
For performance reasons, the value of errors is not checked for validity unless a decoding error actually occurs, Python Development Mode is enabled or a debug build is used.
Note
Passing the encoding argument to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66422 allows decoding any bytes-like object directly, without needing to make a temporary
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66424 object.
Changed in version 3. 1. Added support for keyword arguments.
Changed in version 3. 9. The value of the errors argument is now checked in Python Development Mode and in debug mode .
bytes. endswith[suffix[ , start[ , end]]] ¶ bytearray. endswith[suffix[ , start[ , end]]] ¶Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if the binary data ends with the specified suffix, otherwise return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638. suffix can also be a tuple of suffixes to look for. With optional start, test beginning at that position. With optional end, stop comparing at that position
The suffix[es] to search for may be any bytes-like object .
bytes. find[sub[ , start[ , end]]] ¶ bytearray. find[sub[ , start[ , end]]] ¶Return the lowest index in the data where the subsequence sub is found, such that sub is contained in the slice
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67449. Optional arguments start and end are interpreted as in slice notation. Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6941 if sub is not found
Dãy con cần tìm có thể là bất kỳ đối tượng giống như byte hoặc một số nguyên trong khoảng từ 0 đến 255.
Note
The
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67451 method should be used only if you need to know the position of sub. To check if sub is a substring or not, use the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 698 operator
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6733
Changed in version 3. 3. Also accept an integer in the range 0 to 255 as the subsequence.
bytes. index[sub[ , start[ , end]]] ¶ bytearray. index[sub[ , start[ , end]]] ¶Like
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67451, but raise
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6977 when the subsequence is not found
Dãy con cần tìm có thể là bất kỳ đối tượng giống như byte hoặc một số nguyên trong khoảng từ 0 đến 255.
Changed in version 3. 3. Also accept an integer in the range 0 to 255 as the subsequence.
bytes. join[iterable] ¶ bytearray. join[iterable] ¶Return a bytes or bytearray object which is the concatenation of the binary data sequences in iterable. A
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 688 will be raised if there are any values in iterable that are not bytes-like objects , including
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66422 objects. The separator between elements is the contents of the bytes or bytearray object providing this method. tĩnh byte. maketrans[from , to] ¶ static bytearray. maketrans[from , to] ¶
This static method returns a translation table usable for
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69003 that will map each character in from into the character at the same position in to; from and to must both be bytes-like objects and have the same length.
New in version 3. 1
bytes. partition[sep] ¶ bytearray. partition[sep] ¶Split the sequence at the first occurrence of sep, and return a 3-tuple containing the part before the separator, the separator itself or its bytearray copy, and the part after the separator. If the separator is not found, return a 3-tuple containing a copy of the original sequence, followed by two empty bytes or bytearray objects
The separator to search for may be any bytes-like object .
bytes. replace[old , new[ , count]] ¶ bytearray. replace[old , new[ , count]] ¶Return a copy of the sequence with all occurrences of subsequence old replaced by new. If the optional argument count is given, only the first count occurrences are replaced
The subsequence to search for and its replacement may be any bytes-like object .
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
bytes. rfind[sub[ , start[ , end]]] ¶ bytearray. rfind[sub[ , start[ , end]]] ¶Return the highest index in the sequence where the subsequence sub is found, such that sub is contained within
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67449. Optional arguments start and end are interpreted as in slice notation. Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6941 on failure
Dãy con cần tìm có thể là bất kỳ đối tượng giống như byte hoặc một số nguyên trong khoảng từ 0 đến 255.
Changed in version 3. 3. Also accept an integer in the range 0 to 255 as the subsequence.
bytes. rindex[sub[ , start[ , end]]] ¶ bytearray. rindex[sub[ , start[ , end]]] ¶Like
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67729 but raises
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6977 when the subsequence sub is not found
Dãy con cần tìm có thể là bất kỳ đối tượng giống như byte hoặc một số nguyên trong khoảng từ 0 đến 255.
Changed in version 3. 3. Also accept an integer in the range 0 to 255 as the subsequence.
bytes. rpartition[sep] ¶ bytearray. rpartition[sep] ¶Split the sequence at the last occurrence of sep, and return a 3-tuple containing the part before the separator, the separator itself or its bytearray copy, and the part after the separator. If the separator is not found, return a 3-tuple containing two empty bytes or bytearray objects, followed by a copy of the original sequence
The separator to search for may be any bytes-like object .
bytes. startswith[prefix[ , start[ , end]]] ¶ bytearray. startswith[prefix[ , start[ , end]]] ¶Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if the binary data starts with the specified prefix, otherwise return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638. prefix can also be a tuple of prefixes to look for. With optional start, test beginning at that position. With optional end, stop comparing at that position
The prefix[es] to search for may be any bytes-like object .
bytes. translate[table , / , delete=b''] ¶ bytearray. translate[table , / , delete=b''] ¶Return a copy of the bytes or bytearray object where all bytes occurring in the optional argument delete are removed, and the remaining bytes have been mapped through the given translation table, which must be a bytes object of length 256
You can use the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69010 method to create a translation table
Set the table argument to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631 for translations that only delete characters
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6734
Changed in version 3. 6. delete is now supported as a keyword argument.
The following methods on bytes and bytearray objects have default behaviours that assume the use of ASCII compatible binary formats, but can still be used with arbitrary binary data by passing appropriate arguments. Note that all of the bytearray methods in this section do not operate in place, and instead produce new objects
bytes. center[width[ , fillbyte]] ¶ bytearray. center[width[ , fillbyte]] ¶Return a copy of the object centered in a sequence of length width. Padding is done using the specified fillbyte [default is an ASCII space]. For
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 objects, the original sequence is returned if width is less than or equal to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66413
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
bytes. ljust[width[ , fillbyte]] ¶ bytearray. ljust[width[ , fillbyte]] ¶Return a copy of the object left justified in a sequence of length width. Padding is done using the specified fillbyte [default is an ASCII space]. For
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 objects, the original sequence is returned if width is less than or equal to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66413
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
bytes. lstrip[[chars]] ¶ bytearray. lstrip[[chars]] ¶Return a copy of the sequence with specified leading bytes removed. The chars argument is a binary sequence specifying the set of byte values to be removed - the name refers to the fact this method is usually used with ASCII characters. If omitted or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631, the chars argument defaults to removing ASCII whitespace. The chars argument is not a prefix; rather, all combinations of its values are stripped
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6735
Chuỗi nhị phân của các giá trị byte cần xóa có thể là bất kỳ đối tượng giống byte . See
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69017 for a method that will remove a single prefix string rather than all of a set of characters. For example.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6736
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
bytes. rjust[width[ , fillbyte]] ¶ bytearray. rjust[width[ , fillbyte]] ¶Return a copy of the object right justified in a sequence of length width. Padding is done using the specified fillbyte [default is an ASCII space]. For
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 objects, the original sequence is returned if width is less than or equal to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66413
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
bytes. rsplit[sep=None , maxsplit=- 1] ¶ bytearray. rsplit[sep=None , maxsplit=- 1] ¶Split the binary sequence into subsequences of the same type, using sep as the delimiter string. If maxsplit is given, at most maxsplit splits are done, the rightmost ones. If sep is not specified or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631, any subsequence consisting solely of ASCII whitespace is a separator. Except for splitting from the right,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67733 behaves like
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67734 which is described in detail belowbytes. rstrip[[chars]] ¶ bytearray. rstrip[[chars]] ¶
Return a copy of the sequence with specified trailing bytes removed. The chars argument is a binary sequence specifying the set of byte values to be removed - the name refers to the fact this method is usually used with ASCII characters. If omitted or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631, the chars argument defaults to removing ASCII whitespace. The chars argument is not a suffix; rather, all combinations of its values are stripped
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6737
The binary sequence of byte values to remove may be any bytes-like object . See
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69024 for a method that will remove a single suffix string rather than all of a set of characters. For example.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6738
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
bytes. split[sep=None , maxsplit=- 1] ¶ bytearray. split[sep=None , maxsplit=- 1] ¶Split the binary sequence into subsequences of the same type, using sep as the delimiter string. If maxsplit is given and non-negative, at most maxsplit splits are done [thus, the list will have at most
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67737 elements]. If maxsplit is not specified or is
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6941, then there is no limit on the number of splits [all possible splits are made]
If sep is given, consecutive delimiters are not grouped together and are deemed to delimit empty subsequences [for example,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69027 returns
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69028]. The sep argument may consist of a multibyte sequence [for example,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69029 returns
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69030]. Splitting an empty sequence with a specified separator returns
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69031 or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69032 depending on the type of object being split. The sep argument may be any bytes-like object .
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6739
If sep is not specified or is
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631, a different splitting algorithm is applied. runs of consecutive ASCII whitespace are regarded as a single separator, and the result will contain no empty strings at the start or end if the sequence has leading or trailing whitespace. Consequently, splitting an empty sequence or a sequence consisting solely of ASCII whitespace without a specified separator returns
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 649
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6740bytes. strip[[chars]] ¶ bytearray. strip[[chars]] ¶
Return a copy of the sequence with specified leading and trailing bytes removed. The chars argument is a binary sequence specifying the set of byte values to be removed - the name refers to the fact this method is usually used with ASCII characters. If omitted or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631, the chars argument defaults to removing ASCII whitespace. The chars argument is not a prefix or suffix; rather, all combinations of its values are stripped
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6741
The binary sequence of byte values to remove may be any bytes-like object .
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
The following methods on bytes and bytearray objects assume the use of ASCII compatible binary formats and should not be applied to arbitrary binary data. Lưu ý rằng tất cả các phương thức bytearray trong phần này không hoạt động tại chỗ mà thay vào đó tạo ra các đối tượng mới
bytes. capitalize[] ¶ bytearray. capitalize[] ¶Return a copy of the sequence with each byte interpreted as an ASCII character, and the first byte capitalized and the rest lowercased. Non-ASCII byte values are passed through unchanged
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
bytes. expandtabs[tabsize=8] ¶ bytearray. expandtabs[tabsize=8] ¶Return a copy of the sequence where all ASCII tab characters are replaced by one or more ASCII spaces, depending on the current column and the given tab size. Tab positions occur every tabsize bytes [default is 8, giving tab positions at columns 0, 8, 16 and so on]. To expand the sequence, the current column is set to zero and the sequence is examined byte by byte. If the byte is an ASCII tab character [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69036], one or more space characters are inserted in the result until the current column is equal to the next tab position. [The tab character itself is not copied. ] If the current byte is an ASCII newline [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69037] or carriage return [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69038], it is copied and the current column is reset to zero. Any other byte value is copied unchanged and the current column is incremented by one regardless of how the byte value is represented when printed
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6742
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
bytes. isalnum[] ¶ bytearray. isalnum[] ¶Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if all bytes in the sequence are alphabetical ASCII characters or ASCII decimal digits and the sequence is not empty,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise. Alphabetic ASCII characters are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69041. ASCII decimal digits are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69042
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6743bytes. isalpha[] ¶ bytearray. isalpha[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if all bytes in the sequence are alphabetic ASCII characters and the sequence is not empty,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise. Alphabetic ASCII characters are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69041
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6744bytes. isascii[] ¶ bytearray. isascii[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if the sequence is empty or all bytes in the sequence are ASCII,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise. ASCII bytes are in the range 0-0x7F
New in version 3. 7
bytes. isdigit[] ¶ bytearray. isdigit[] ¶Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if all bytes in the sequence are ASCII decimal digits and the sequence is not empty,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise. ASCII decimal digits are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69042
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6745bytes. islower[] ¶ bytearray. islower[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if there is at least one lowercase ASCII character in the sequence and no uppercase ASCII characters,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6746
Lowercase ASCII characters are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69053. Uppercase ASCII characters are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69054bytes. isspace[] ¶ bytearray. isspace[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if all bytes in the sequence are ASCII whitespace and the sequence is not empty,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise. ASCII whitespace characters are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69057 [space, tab, newline, carriage return, vertical tab, form feed]bytes. istitle[] ¶ bytearray. istitle[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if the sequence is ASCII titlecase and the sequence is not empty,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise. See
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69060 for more details on the definition of “titlecase”
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6747bytes. isupper[] ¶ bytearray. ăn tối[] ¶
Return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if there is at least one uppercase alphabetic ASCII character in the sequence and no lowercase ASCII characters,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 otherwise
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6748
Lowercase ASCII characters are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69053. Uppercase ASCII characters are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69054bytes. lower[] ¶ bytearray. lower[] ¶
Return a copy of the sequence with all the uppercase ASCII characters converted to their corresponding lowercase counterpart
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6749
Lowercase ASCII characters are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69053. Uppercase ASCII characters are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69054
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
bytes. splitlines[keepends=False] ¶ bytearray. splitlines[keepends=False] ¶Return a list of the lines in the binary sequence, breaking at ASCII line boundaries. This method uses the universal newlines approach to splitting lines. Line breaks are not included in the resulting list unless keepends is given and true.
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6770
Unlike
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67734 when a delimiter string sep is given, this method returns an empty list for the empty string, and a terminal line break does not result in an extra line
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6771bytes. swapcase[] ¶ bytearray. swapcase[] ¶
Return a copy of the sequence with all the lowercase ASCII characters converted to their corresponding uppercase counterpart and vice-versa
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6772
Lowercase ASCII characters are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69053. Uppercase ASCII characters are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69054
Unlike
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69070, it is always the case that
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69071 for the binary versions. Case conversions are symmetrical in ASCII, even though that is not generally true for arbitrary Unicode code points
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
bytes. title[] ¶ bytearray. title[] ¶Return a titlecased version of the binary sequence where words start with an uppercase ASCII character and the remaining characters are lowercase. Uncased byte values are left unmodified
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6773
Lowercase ASCII characters are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69053. Uppercase ASCII characters are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69054. All other byte values are uncased
The algorithm uses a simple language-independent definition of a word as groups of consecutive letters. The definition works in many contexts but it means that apostrophes in contractions and possessives form word boundaries, which may not be the desired result
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6774
A workaround for apostrophes can be constructed using regular expressions
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6775
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
bytes. upper[] ¶ bytearray. upper[] ¶Return a copy of the sequence with all the lowercase ASCII characters converted to their corresponding uppercase counterpart
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6776
Lowercase ASCII characters are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69053. Uppercase ASCII characters are those byte values in the sequence
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69054
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
bytes. zfill[width] ¶ bytearray. zfill[width] ¶Return a copy of the sequence left filled with ASCII
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69076 digits to make a sequence of length width. A leading sign prefix [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69077/
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69078] is handled by inserting the padding after the sign character rather than before. For
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 objects, the original sequence is returned if width is less than or equal to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 69080
For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6777
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
7426-style Bytes Formatting¶
Note
The formatting operations described here exhibit a variety of quirks that lead to a number of common errors [such as failing to display tuples and dictionaries correctly]. If the value being printed may be a tuple or dictionary, wrap it in a tuple
Bytes objects [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423/
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66424] have one unique built-in operation. the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67783 operator [modulo]. This is also known as the bytes formatting or interpolation operator. Given
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67784 [where format is a bytes object],
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67783 conversion specifications in format are replaced with zero or more elements of values. The effect is similar to using the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67786 in the C language
If format requires a single argument, values may be a single non-tuple object. 5 Mặt khác, các giá trị phải là một bộ có số mục chính xác được chỉ định bởi đối tượng byte định dạng hoặc một đối tượng ánh xạ đơn lẻ [ví dụ: từ điển]
A conversion specifier contains two or more characters and has the following components, which must occur in this order
The
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7787 character, which marks the start of the specifierKhóa ánh xạ [tùy chọn], bao gồm một chuỗi ký tự trong ngoặc đơn [ví dụ:
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7788]Conversion flags [optional], which affect the result of some conversion types
Minimum field width [optional]. Nếu được chỉ định là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7789 [dấu hoa thị], chiều rộng thực tế được đọc từ phần tử tiếp theo của bộ giá trị và đối tượng cần chuyển đổi xuất hiện sau chiều rộng trường tối thiểu và độ chính xác tùy chọnPrecision [optional], given as a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7790 [dot] followed by the precision. If specified asdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
7789 [an asterisk], the actual precision is read from the next element of the tuple in values, and the value to convert comes after the precisionCông cụ sửa đổi độ dài [tùy chọn]
Conversion type
When the right argument is a dictionary [or other mapping type], then the formats in the bytes object must include a parenthesised mapping key into that dictionary inserted immediately after the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67787 character. The mapping key selects the value to be formatted from the mapping. For example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6778
In this case no
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66400 specifiers may occur in a format [since they require a sequential parameter list]
The conversion flag characters are
Lá cờ
Meaning
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67794
Việc chuyển đổi giá trị sẽ sử dụng “hình thức thay thế” [được định nghĩa bên dưới]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67777
The conversion will be zero padded for numeric values
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67779
The converted value is left adjusted [overrides the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67777 conversion if both are given]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67798
[khoảng trắng] Nên để trống trước số dương [hoặc chuỗi trống] được tạo bởi chuyển đổi đã ký
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67778
Ký tự dấu [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67778 hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67779] sẽ đứng trước chuyển đổi [ghi đè cờ “dấu cách”]
Có thể có công cụ sửa đổi độ dài [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68202,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68203 hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68204], nhưng bị bỏ qua vì nó không cần thiết đối với Python – vì vậy e. g.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68205 giống hệt với
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68206
The conversion types are
Conversion
Meaning
ghi chú
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68207
Signed integer decimal
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68208
Signed integer decimal
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68209
Signed octal value
[1]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68210
Obsolete type – it is identical to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68207
[8]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68212
Đã ký thập lục phân [chữ thường]
[2]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68213
Đã ký thập lục phân [chữ hoa]
[2]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68214
Floating point exponential format [lowercase]
[3]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68215
Định dạng số mũ dấu phẩy động [chữ hoa]
[3]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68216
Floating point decimal format
[3]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68217
Floating point decimal format
[3]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68218
Định dạng dấu phẩy động. Sử dụng định dạng số mũ chữ thường nếu số mũ nhỏ hơn -4 hoặc không nhỏ hơn độ chính xác, nếu không thì định dạng thập phân
[4]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68219
Định dạng dấu phẩy động. Sử dụng định dạng số mũ viết hoa nếu số mũ nhỏ hơn -4 hoặc không nhỏ hơn độ chính xác, nếu không thì định dạng thập phân
[4]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68220
Single byte [accepts integer or single byte objects]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6022
Bytes [any object that follows the buffer protocol or has
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6023].
[5]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68223
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68223 is an alias for
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6022 and should only be used for Python2/3 code bases
[6]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68225
Bytes [converts any Python object using
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6028]
[5]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68221
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68221 is an alias for
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68225 and should only be used for Python2/3 code bases
[7]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67787
Không có đối số nào được chuyển đổi, dẫn đến ký tự
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67787 trong kết quả
ghi chú
Dạng thay thế làm cho một bộ xác định bát phân hàng đầu [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8229] được chèn vào trước chữ số đầu tiênDạng thay thế làm cho một
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8230 hoặcdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8231 đứng đầu [tùy thuộc vào việc định dạngdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8212 hoặcdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8213 được sử dụng] được chèn vào trước chữ số đầu tiênDạng thay thế khiến kết quả luôn chứa dấu thập phân, ngay cả khi không có chữ số nào theo sau nó
Độ chính xác xác định số chữ số sau dấu thập phân và mặc định là 6
Dạng thay thế làm cho kết quả luôn chứa dấu thập phân và các số 0 ở cuối không bị xóa như cách khác
Độ chính xác xác định số chữ số có nghĩa trước và sau dấu thập phân và mặc định là 6
Nếu độ chính xác là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8234, đầu ra bị cắt bớt thành ký tựdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8234def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
041 is deprecated, but will not be removed during the 3. x seriesdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
042 is deprecated, but will not be removed during the 3. x seriesXem PEP 237
Note
The bytearray version of this method does not operate in place - it always produces a new object, even if no changes were made
See also
PEP 461 - Adding % formatting to bytes and bytearray
Mới trong phiên bản 3. 5
Memory Views¶
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68242 objects allow Python code to access the internal data of an object that supports the buffer protocol without copying. class memoryview[object] ¶
Create a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68242 that references object. object must support the buffer protocol. Built-in objects that support the buffer protocol include
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66424
A
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68242 has the notion of an element, which is the atomic memory unit handled by the originating object. For many simple types such as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66424, an element is a single byte, but other types such as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6050 may have bigger elements
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6051 is equal to the length of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6052. If
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6053, the length is 1. If
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6054, the length is equal to the number of elements in the view. For higher dimensions, the length is equal to the length of the nested list representation of the view. The
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6055 attribute will give you the number of bytes in a single element
A
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68242 supports slicing and indexing to expose its data. One-dimensional slicing will result in a subview
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6779
If
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6057 is one of the native format specifiers from the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6058 module, indexing with an integer or a tuple of integers is also supported and returns a single element with the correct type. One-dimensional memoryviews can be indexed with an integer or a one-integer tuple. Multi-dimensional memoryviews can be indexed with tuples of exactly ndim integers where ndim is the number of dimensions. Zero-dimensional memoryviews can be indexed with the empty tuple
Here is an example with a non-byte format
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6820
If the underlying object is writable, the memoryview supports one-dimensional slice assignment. Resizing is not allowed
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6821
One-dimensional memoryviews of hashable [read-only] types with formats ‘B’, ‘b’ or ‘c’ are also hashable. The hash is defined as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6059
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6822
Changed in version 3. 3. One-dimensional memoryviews can now be sliced. One-dimensional memoryviews with formats ‘B’, ‘b’ or ‘c’ are now hashable.
Changed in version 3. 4. memoryview is now registered automatically with
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66396
Changed in version 3. 5. memoryviews can now be indexed with tuple of integers.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68242 has several methods__eq__[exporter] ¶
Chế độ xem bộ nhớ và trình xuất PEP 3118 bằng nhau nếu hình dạng của chúng tương đương nhau và nếu tất cả các giá trị tương ứng đều bằng nhau khi mã định dạng tương ứng của toán hạng được diễn giải bằng cú pháp
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6058
For the subset of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6058 format strings currently supported by
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6064,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6065 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6066 are equal if
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6067
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6823
If either format string is not supported by the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6058 module, then the objects will always compare as unequal [even if the format strings and buffer contents are identical]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6824
Note that, as with floating point numbers,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6069 does not imply
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6070 for memoryview objects
Changed in version 3. 3. Previous versions compared the raw memory disregarding the item format and the logical array structure.
tobytes[order='C'] ¶Return the data in the buffer as a bytestring. This is equivalent to calling the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 constructor on the memoryview
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6825
For non-contiguous arrays the result is equal to the flattened list representation with all elements converted to bytes.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6072 supports all format strings, including those that are not in
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6058 module syntax
New in version 3. 8. order can be {‘C’, ‘F’, ‘A’}. When order is ‘C’ or ‘F’, the data of the original array is converted to C or Fortran order. For contiguous views, ‘A’ returns an exact copy of the physical memory. In particular, in-memory Fortran order is preserved. For non-contiguous views, the data is converted to C first. order=None is the same as order=’C’.
hex[[sep[, bytes_per_sep]]]¶Return a string object containing two hexadecimal digits for each byte in the buffer
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6826
Mới trong phiên bản 3. 5
Changed in version 3. 8. Similar to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 68260,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6075 now supports optional sep and bytes_per_sep parameters to insert separators between bytes in the hex output. tolist[] ¶
Return the data in the buffer as a list of elements
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6827
Changed in version 3. 3.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6064 now supports all single character native formats in
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6058 module syntax as well as multi-dimensional representations. toreadonly[] ¶
Return a readonly version of the memoryview object. The original memoryview object is unchanged
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6828
New in version 3. 8
release[] ¶Release the underlying buffer exposed by the memoryview object. Many objects take special actions when a view is held on them [for example, a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66424 would temporarily forbid resizing]; therefore, calling release[] is handy to remove these restrictions [and free any dangling resources] as soon as possible
After this method has been called, any further operation on the view raises a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6977 [except
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6080 itself which can be called multiple times]
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6829
The context management protocol can be used for a similar effect, using the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6081 statement
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6900
New in version 3. 2
cast[format[ , shape]] ¶Cast a memoryview to a new format or shape. shape defaults to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6082, which means that the result view will be one-dimensional. The return value is a new memoryview, but the buffer itself is not copied. Supported casts are 1D -> C- contiguous and C-contiguous -> 1D.
The destination format is restricted to a single element native format in
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6058 syntax. One of the formats must be a byte format [‘B’, ‘b’ or ‘c’]. The byte length of the result must be the same as the original length
Cast 1D/long to 1D/unsigned bytes
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6901
Truyền 1D/byte không dấu thành 1D/char
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6902
Cast 1D/bytes to 3D/ints to 1D/signed char
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6903
Cast 1D/unsigned long to 2D/unsigned long
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6904
New in version 3. 3
Changed in version 3. 5. The source format is no longer restricted when casting to a byte view.
There are also several readonly attributes available
obj ¶The underlying object of the memoryview
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6905
New in version 3. 3
nbytes ¶def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6084. This is the amount of space in bytes that the array would use in a contiguous representation. It is not necessarily equal to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6085
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6906
mảng nhiều chiều
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6907
New in version 3. 3
chỉ đọc ¶Một bool cho biết bộ nhớ có ở chế độ chỉ đọc hay không
định dạng ¶Một chuỗi chứa định dạng [theo kiểu mô-đun
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6058] cho từng thành phần trong dạng xem. Một chế độ xem bộ nhớ có thể được tạo từ các trình xuất với các chuỗi định dạng tùy ý, nhưng một số phương thức [e. g.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6064] bị giới hạn ở các định dạng phần tử đơn gốc
Đã thay đổi trong phiên bản 3. 3. định dạng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6088 hiện được xử lý theo cú pháp mô-đun cấu trúc. Điều này có nghĩa là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6089. kích thước mặt hàng ¶
Kích thước tính bằng byte của từng phần tử của memoryview
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6908ndim ¶
Một số nguyên cho biết có bao nhiêu chiều của một mảng nhiều chiều mà bộ nhớ đại diện
Một bộ số nguyên có độ dài bằng _______0090 tạo ra hình dạng của bộ nhớ dưới dạng một mảng N chiều
Đã thay đổi trong phiên bản 3. 3. Một bộ trống thay vì
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631 khi ndim = 0. sải chân ¶
Một bộ số nguyên có độ dài
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6090 cung cấp kích thước tính bằng byte để truy cập từng phần tử cho từng chiều của mảng
Đã thay đổi trong phiên bản 3. 3. Một bộ trống thay vì
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631 khi ndim = 0. độ lệch con ¶
Được sử dụng nội bộ cho các mảng kiểu PIL. Giá trị chỉ là thông tin
c_contiguous ¶Một bool cho biết liệu bộ nhớ có phải là C- tiếp giáp .
New in version 3. 3
f_contiguous ¶Một bool cho biết bộ nhớ có phải là Fortran hay không tiếp giáp .
New in version 3. 3
tiếp giáp ¶Một bool cho biết liệu bộ nhớ có liền kề .
New in version 3. 3
Loại tập hợp — def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
6469, def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
6470¶
Đối tượng tập hợp là một tập hợp không theo thứ tự các đối tượng có thể băm riêng biệt. Các ứng dụng phổ biến bao gồm kiểm tra tư cách thành viên, loại bỏ các bản sao khỏi chuỗi và tính toán các phép toán như giao, hợp, hiệu và hiệu đối xứng. [Đối với các vùng chứa khác, hãy xem các lớp
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66468,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66393 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66394 tích hợp sẵn và mô-đun
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6099. ]
Giống như các bộ sưu tập khác, bộ hỗ trợ
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6100,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6101 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6102. Là một tập hợp không có thứ tự, các tập hợp không ghi vị trí phần tử hoặc thứ tự chèn. Theo đó, các bộ không hỗ trợ lập chỉ mục, cắt hoặc hành vi giống như trình tự khác
Hiện tại có hai loại bộ tích hợp sẵn,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66469 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66470. Loại
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66469 có thể thay đổi — có thể thay đổi nội dung bằng các phương pháp như
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6106 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67301. Vì nó có thể thay đổi nên nó không có giá trị băm và không thể được sử dụng làm khóa từ điển hoặc làm thành phần của tập hợp khác. Loại
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66470 là bất biến và có thể băm — không thể thay đổi nội dung của nó sau khi được tạo; .
Ví dụ: có thể tạo các tập hợp không trống [không phải tập hợp cố định] bằng cách đặt danh sách các phần tử được phân tách bằng dấu phẩy trong dấu ngoặc nhọn.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6109, ngoài hàm tạo
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66469
Các hàm tạo cho cả hai lớp hoạt động như nhau
lớp bộ[[có thể lặp lại]]¶class frozenset[[iterable]]¶Trả về một đối tượng set hoặc freezeset mới có các phần tử được lấy từ iterable. Các phần tử của tập hợp phải có thể băm được . Để đại diện cho các tập hợp, các tập hợp bên trong phải là ____16470 đối tượng. Nếu iterable không được chỉ định, một bộ trống mới được trả về.
Các bộ có thể được tạo bằng nhiều cách
Sử dụng danh sách các phần tử được phân tách bằng dấu phẩy trong dấu ngoặc nhọn.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
109Sử dụng một bộ hiểu.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
113Sử dụng hàm tạo kiểu.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
51,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
115,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
116
Các trường hợp của
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66469 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66470 cung cấp các thao tác sau[các] ống kính
Trả về số phần tử trong tập hợp s [số lượng của s]
x in sKiểm tra x cho tư cách thành viên trong s
x không vào sKiểm tra x cho người không phải là thành viên trong s
isdisjoint[other] ¶Trả về
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 nếu tập hợp không có phần tử nào chung với tập hợp khác. Các tập hợp là rời nhau khi và chỉ khi giao của chúng là tập hợp rỗngtập hợp con[khác] ¶ set 6 120issuperset[other] ¶ set >= other
Kiểm tra xem mọi phần tử trong tập hợp khác có nằm trong tập hợp không
đặt > khácKiểm tra xem tập hợp này có phải là tập hợp lớn nhất của tập hợp khác hay không, nghĩa là,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6121công đoàn[*những người khác]¶set | khác . .
Trả về một tập hợp mới với các phần tử từ tập hợp và tất cả các phần tử khác
giao lộ[*các ngã tư khác]¶set & other & ...Trả về một tập hợp mới với các phần tử chung cho tập hợp và tất cả các phần tử khác
sự khác biệt[*khác]¶set - other - ...Trả về một tập hợp mới với các phần tử trong tập hợp không có trong các phần tử khác
symmetric_difference[khác] ¶ set ^ otherTrả về một tập hợp mới có các phần tử trong tập hợp này hoặc tập hợp khác nhưng không phải cả hai
bản sao[] ¶Trả lại một bản sao nông của tập hợp
Lưu ý, các phiên bản không phải toán tử của các phương thức
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6122,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6123,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6124,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6125,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6126 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6127 sẽ chấp nhận bất kỳ lần lặp nào làm đối số. Ngược lại, các đối tác dựa trên toán tử của chúng yêu cầu các đối số của chúng được đặt. Điều này loại bỏ các cấu trúc dễ bị lỗi như
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6128 để có thể đọc dễ dàng hơn
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6129
Cả
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66469 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66470 đều hỗ trợ thiết lập so sánh. Hai tập hợp bằng nhau khi và chỉ khi mọi phần tử của mỗi tập hợp đều chứa trong tập hợp kia [mỗi tập hợp này là tập con của tập hợp kia]. Một tập hợp nhỏ hơn tập hợp khác khi và chỉ khi tập hợp đầu tiên là tập hợp con thực sự của tập hợp thứ hai [là tập hợp con, nhưng không bằng nhau]. Một tập hợp lớn hơn tập hợp khác khi và chỉ khi tập hợp đầu tiên là tập hợp lớn nhất của tập hợp thứ hai [là tập hợp phụ, nhưng không bằng nhau]
Các phiên bản của
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66469 được so sánh với các phiên bản của
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66470 dựa trên các thành viên của chúng. Ví dụ:
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6134 trả về
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6136 cũng vậy
So sánh tập hợp con và đẳng thức không tổng quát hóa thành hàm sắp xếp tổng. Ví dụ: hai tập hợp khác nhau bất kỳ không rỗng thì không bằng nhau và không phải là tập con của nhau, vì vậy tất cả các giá trị sau trả về
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6138,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6139 hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6140
Vì các tập hợp chỉ xác định thứ tự một phần [mối quan hệ tập hợp con], nên đầu ra của phương thức
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6141 không được xác định cho danh sách các tập hợp
Các thành phần của tập hợp, như khóa từ điển, phải có thể băm .
Các hoạt động nhị phân kết hợp các phiên bản
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66469 với
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66470 trả về loại toán hạng đầu tiên. Ví dụ.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6144 trả về một thể hiện của
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66470
Bảng sau đây liệt kê các hoạt động có sẵn cho
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66469 không áp dụng cho các trường hợp bất biến của
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66470cập nhật[*khác]¶set |= khác . .
Cập nhật tập hợp, thêm các phần tử từ tất cả các phần tử khác
intersection_update[*khác]¶set &= other & ...Cập nhật tập hợp, chỉ giữ lại các phần tử được tìm thấy trong đó và tất cả các phần tử khác
difference_update[*khác]¶set -= other | .Cập nhật tập hợp, loại bỏ các phần tử được tìm thấy trong các tập hợp khác
symmetric_difference_update[khác] ¶ set ^= otherCập nhật tập hợp, chỉ giữ lại các phần tử được tìm thấy trong một trong hai tập hợp chứ không phải trong cả hai
add[elem] ¶Thêm phần tử elem vào tập hợp
xóa[elem] ¶Xóa phần tử elem khỏi tập hợp. Tăng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6148 nếu elem không có trong tập hợploại bỏ[elem] ¶
Xóa phần tử elem khỏi tập hợp nếu có
pop[] ¶Xóa và trả về một phần tử tùy ý khỏi tập hợp. Tăng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6148 nếu bộ trốngxóa[] ¶
Xóa tất cả các phần tử khỏi tập hợp
Lưu ý, các phiên bản không phải toán tử của các phương thức ________ 0150, ________ 0151, ________ 0152 và ________ 0153 sẽ chấp nhận bất kỳ lần lặp nào làm đối số
Note, the elem argument to the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6900,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67301, and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6156 methods may be a set. Để hỗ trợ tìm kiếm một bộ đóng băng tương đương, một bộ tạm thời được tạo từ elem
Các loại ánh xạ — def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
6468¶
A ánh xạ đối tượng ánh xạ các giá trị có thể băm thành các đối tượng tùy ý. Ánh xạ là các đối tượng có thể thay đổi. Hiện tại chỉ có một loại ánh xạ tiêu chuẩn, từ điển. [Đối với các bộ chứa khác, hãy xem các lớp
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66393,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66469 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66394 tích hợp sẵn và mô-đun
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6099. ]
Khóa của từ điển gần như là giá trị tùy ý. Values that are not hashable , that is, values containing lists, dictionaries or other mutable types [that are compared by value rather than by object identity] may not be used as keys. Values that compare equal [such as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 655,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6163, and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656] can be used interchangeably to index the same dictionary entry. class dict[**kwargs] ¶ class dict[mapping , **kwargs]class dict[iterable , **kwargs]
Return a new dictionary initialized from an optional positional argument and a possibly empty set of keyword arguments
Dictionaries can be created by several means
Use a comma-separated list of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
165 pairs within braces.def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
166 ordef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
167Use a dict comprehension.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
50,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
169Use the type constructor.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
170,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
171,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
172
Nếu không có đối số vị trí nào được cung cấp, một từ điển trống sẽ được tạo. If a positional argument is given and it is a mapping object, a dictionary is created with the same key-value pairs as the mapping object. Otherwise, the positional argument must be an iterable object. Each item in the iterable must itself be an iterable with exactly two objects. The first object of each item becomes a key in the new dictionary, and the second object the corresponding value. If a key occurs more than once, the last value for that key becomes the corresponding value in the new dictionary.
If keyword arguments are given, the keyword arguments and their values are added to the dictionary created from the positional argument. If a key being added is already present, the value from the keyword argument replaces the value from the positional argument
Để minh họa, tất cả các ví dụ sau đều trả về một từ điển bằng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6173
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6909
Việc cung cấp các đối số từ khóa như trong ví dụ đầu tiên chỉ hoạt động đối với các khóa là mã định danh Python hợp lệ. Mặt khác, bất kỳ khóa hợp lệ nào cũng có thể được sử dụng
Đây là các hoạt động mà từ điển hỗ trợ [và do đó, các loại ánh xạ tùy chỉnh cũng sẽ hỗ trợ]
danh sách[d]Trả về danh sách tất cả các khóa được sử dụng trong từ điển d
cho mượn]Trả về số mục trong từ điển d
đ[phím]Trả lại mục của d bằng phím key. Tăng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6148 nếu khóa không có trong bản đồ
Nếu một lớp con của dict định nghĩa một phương thức
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6175 và không có khóa, thì hoạt động
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6176 gọi phương thức đó với đối số là key key. Hoạt động
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6176 sau đó trả về hoặc tăng bất cứ thứ gì được trả lại hoặc tăng bởi lệnh gọi
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6178. Không có hoạt động hoặc phương thức nào khác gọi
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6175. Nếu
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6175 không được xác định, thì
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6148 được nâng lên.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6175 phải là một phương thức;
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 600
Ví dụ trên cho thấy một phần của việc triển khai
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6183. Một phương pháp
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6184 khác được sử dụng bởi
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6185d[key] = giá trị
Đặt
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6176 thành giá trịdel d[key]
Xóa
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6176 khỏi d. Tăng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6148 nếu khóa không có trong bản đồphím vào d
Trả lại
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 nếu d có khóa chính, ngược lại
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638phím không vào d
Tương đương với
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6191lặp đi lặp lại [d]
Trả lại một trình vòng lặp qua các khóa của từ điển. Đây là lối tắt cho
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6192xóa[] ¶
Xóa tất cả các mục khỏi từ điển
bản sao[] ¶Trả lại một bản sao nông của từ điển
phương thức lớp từ khóa[có thể lặp lại[, value]]¶Tạo một từ điển mới với các khóa từ iterable và các giá trị được đặt thành giá trị
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6193 là một phương thức lớp trả về một từ điển mới. giá trị mặc định là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631. Tất cả các giá trị chỉ tham chiếu đến một thể hiện duy nhất, do đó, thông thường giá trị là một đối tượng có thể thay đổi chẳng hạn như một danh sách trống không có ý nghĩa gì. Để nhận các giá trị riêng biệt, hãy sử dụng hiểu chính tả thay thế. lấy[khóa[ , default]]¶
Trả về giá trị cho khóa nếu khóa có trong từ điển, nếu không thì mặc định. Nếu giá trị mặc định không được cung cấp, nó sẽ mặc định là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631, do đó phương thức này không bao giờ tăng giá trị
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6148items[] ¶
Trả về chế độ xem mới cho các mục của từ điển [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6197 cặp]. Xem tài liệu về đối tượng xem . phím[] ¶
Trả lại chế độ xem mới cho các khóa của từ điển. Xem tài liệu về đối tượng xem .
bật[phím[ , default]]¶Nếu khóa nằm trong từ điển, hãy xóa nó và trả về giá trị của nó, nếu không thì trả về giá trị mặc định. Nếu giá trị mặc định không được cung cấp và khóa không có trong từ điển, thì một số
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6148 sẽ xuất hiệnpopitem[] ¶
Xóa và trả về cặp
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6197 từ từ điển. Các cặp được trả lại theo thứ tự LIFO
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6200 rất hữu ích để lặp lại triệt để một từ điển, như thường được sử dụng trong các thuật toán tập hợp. Nếu từ điển trống, gọi
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6200 sẽ tăng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6148
Đã thay đổi trong phiên bản 3. 7. Đơn hàng LIFO hiện đã được đảm bảo. Trong các phiên bản trước,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6200 sẽ trả về một cặp khóa/giá trị tùy ý. đảo ngược[d]
Trả về một trình vòng lặp đảo ngược trên các khóa của từ điển. Đây là lối tắt cho
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6204
New in version 3. 8
setdefault[key[ , default]]¶Nếu khóa nằm trong từ điển, hãy trả về giá trị của nó. Nếu không, hãy chèn khóa có giá trị mặc định và trả về giá trị mặc định. mặc định mặc định là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631cập nhật[[khác]]¶
Cập nhật từ điển với các cặp khóa/giá trị từ khác, ghi đè lên các khóa hiện có. Trả lại
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6150 chấp nhận một đối tượng từ điển khác hoặc một cặp khóa/giá trị có thể lặp lại [dưới dạng bộ dữ liệu hoặc các lần lặp khác có độ dài hai]. If keyword arguments are specified, the dictionary is then updated with those key/value pairs.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6208values[] ¶
Return a new view of the dictionary’s values. See the documentation of view objects .
An equality comparison between one
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6209 view and another will always return
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638. This also applies when comparing
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6209 to itself
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 601d . other
Create a new dictionary with the merged keys and values of d and other, which must both be dictionaries. The values of other take priority when d and other share keys
New in version 3. 9
d . = otherUpdate the dictionary d with keys and values from other, which may be either a mapping or an iterable of key/value pairs. The values of other take priority when d and other share keys.
New in version 3. 9
Dictionaries compare equal if and only if they have the same
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6197 pairs [regardless of ordering]. Order comparisons [‘’] raise
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 688.
Dictionaries preserve insertion order. Note that updating a key does not affect the order. Keys added after deletion are inserted at the end
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 602
Changed in version 3. 7. Dictionary order is guaranteed to be insertion order. This behavior was an implementation detail of CPython from 3. 6.
Dictionaries and dictionary views are reversible
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 603
Changed in version 3. 8. Từ điển hiện có thể đảo ngược.
See also
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6214 can be used to create a read-only view of a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66468
Dictionary view objects¶
The objects returned by
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6216,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6209 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6218 are view objects. They provide a dynamic view on the dictionary’s entries, which means that when the dictionary changes, the view reflects these changes
Dictionary views can be iterated over to yield their respective data, and support membership tests
len[dictview]Return the number of entries in the dictionary
iter[dictview]Return an iterator over the keys, values or items [represented as tuples of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6197] in the dictionary
Keys and values are iterated over in insertion order. This allows the creation of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6220 pairs using
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6221.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6222. Another way to create the same list is
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6223
Iterating views while adding or deleting entries in the dictionary may raise a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6224 or fail to iterate over all entries
Changed in version 3. 7. Dictionary order is guaranteed to be insertion order.
x in dictviewReturn
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656 if x is in the underlying dictionary’s keys, values or items [in the latter case, x should be a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6197 tuple]reversed[dictview]
Return a reverse iterator over the keys, values or items of the dictionary. The view will be iterated in reverse order of the insertion
Changed in version 3. 8. Dictionary views are now reversible.
dictview. mappingReturn a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6214 that wraps the original dictionary to which the view refers
New in version 3. 10
Keys views are set-like since their entries are unique and hashable. If all values are hashable, so that
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6197 pairs are unique and hashable, then the items view is also set-like. [Values views are not treated as set-like since the entries are generally not unique. ] For set-like views, all of the operations defined for the abstract base class
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6229 are available [for example,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 678,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 674, or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6232]
An example of dictionary view usage
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 604
Context Manager Types¶
Python’s
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6081 statement supports the concept of a runtime context defined by a context manager. This is implemented using a pair of methods that allow user-defined classes to define a runtime context that is entered before the statement body is executed and exited when the statement endscontextmanager. __enter__[] ¶
Enter the runtime context and return either this object or another object related to the runtime context. The value returned by this method is bound to the identifier in the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6234 clause of
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6081 statements using this context manager
An example of a context manager that returns itself is a file object . File objects return themselves from __enter__[] to allow
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6236 to be used as the context expression in a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6081 statement.
An example of a context manager that returns a related object is the one returned by
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6238. These managers set the active decimal context to a copy of the original decimal context and then return the copy. This allows changes to be made to the current decimal context in the body of the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6081 statement without affecting code outside the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6081 statementcontextmanager. __exit__[exc_type , exc_val , exc_tb] ¶
Exit the runtime context and return a Boolean flag indicating if any exception that occurred should be suppressed. If an exception occurred while executing the body of the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6081 statement, the arguments contain the exception type, value and traceback information. Otherwise, all three arguments are
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631
Returning a true value from this method will cause the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6081 statement to suppress the exception and continue execution with the statement immediately following the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6081 statement. Otherwise the exception continues propagating after this method has finished executing. Exceptions that occur during execution of this method will replace any exception that occurred in the body of the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6081 statement
The exception passed in should never be reraised explicitly - instead, this method should return a false value to indicate that the method completed successfully and does not want to suppress the raised exception. This allows context management code to easily detect whether or not an
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6246 method has actually failed
Python định nghĩa một số trình quản lý ngữ cảnh để hỗ trợ đồng bộ hóa luồng dễ dàng, đóng nhanh tệp hoặc các đối tượng khác và thao tác đơn giản hơn đối với ngữ cảnh số học thập phân đang hoạt động. The specific types are not treated specially beyond their implementation of the context management protocol. See the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6247 module for some examples
Python’s generator s and the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6248 decorator provide a convenient way to implement these protocols. If a generator function is decorated with the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6248 decorator, it will return a context manager implementing the necessary
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6250 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6246 methods, rather than the iterator produced by an undecorated generator function.
Note that there is no specific slot for any of these methods in the type structure for Python objects in the Python/C API. Extension types wanting to define these methods must provide them as a normal Python accessible method. Compared to the overhead of setting up the runtime context, the overhead of a single class dictionary lookup is negligible
Type Annotation Types — Generic Alias , Union ¶
The core built-in types for type annotations are Generic Alias and Union .
Generic Alias Type¶
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6252 objects are generally created by subscripting a class. They are most often used with container classes , such as
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66393 or
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66468. For example,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6255 is a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6252 object created by subscripting the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66393 class with the argument
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6901.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6252 objects are intended primarily for use with type annotations .
Note
Nói chung, chỉ có thể đăng ký một lớp nếu lớp đó triển khai phương thức đặc biệt
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6260
A
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6252 object acts as a proxy for a generic type , implementing parameterized generics.
For a container class, the argument[s] supplied to a subscription of the class may indicate the type[s] of the elements an object contains. For example,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6262 can be used in type annotations to signify a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66469 in which all the elements are of type
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423.
For a class which defines
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6260 but is not a container, the argument[s] supplied to a subscription of the class will often indicate the return type[s] of one or more methods defined on an object. For example,
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6266 can be used on both the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66422 data type and the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423 data type
If
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
269,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
982 will be a re. Match object where the return values ofdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
271 anddef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
272 will both be of typedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6422. We can represent this kind of object in type annotations with thedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
252def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
275.If
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
276, [note thedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
8247 fordef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6423],def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6331 will also be an instance ofdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
280, but the return values ofdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
281 anddef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
282 will both be of typedef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6423. In type annotations, we would represent this variety of re. Match objects withdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
284.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6252 objects are instances of the class
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6286, which can also be used to create
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6252 objects directlyT[X, Y, . ]
Creates a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6252 representing a type
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6289 parameterized by types X, Y, and more depending on the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6289 used. For example, a function expecting a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66393 containing
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6902 elements
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 605
Another example for mapping objects, using a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66468, which is a generic type expecting two type parameters representing the key type and the value type. In this example, the function expects a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66468 with keys of type
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66422 and values of type
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6901.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 606
The builtin functions
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6297 and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6298 do not accept
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6252 types for their second argument
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 607
Thời gian chạy Python không thực thi chú thích loại . This extends to generic types and their type parameters. When creating a container object from a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6252, the elements in the container are not checked against their type. For example, the following code is discouraged, but will run without errors.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 608
Hơn nữa, các tham số loại được tham số hóa xóa các tham số loại trong quá trình tạo đối tượng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 609
Gọi
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 632 hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 633 trên một chung hiển thị loại được tham số hóa
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 610
Phương pháp
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 67769 của các thùng chứa chung sẽ đưa ra một ngoại lệ để không cho phép các lỗi như
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6304
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 611
Tuy nhiên, các biểu thức như vậy hợp lệ khi sử dụng biến loại . Chỉ mục phải có nhiều phần tử bằng với số mục biến loại trong đối tượng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6252 của đối tượng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6306.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 612
Các lớp học chung tiêu chuẩn¶
Các lớp thư viện tiêu chuẩn sau đây hỗ trợ các generic được tham số hóa. danh sách này là không đầy đủ
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6394def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6393def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6468def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6469def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6470def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
312def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
313def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
185def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
315def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
183def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
317def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
318def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
319def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
320def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
321def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
322def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
323def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
324def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
325def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
326def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
327def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
328def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
329def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
229def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
331def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
332def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
333def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6396def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6472def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
336def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
337def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
338def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
339def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
340def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
341def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
342def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
343def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
344def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
345def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
346def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
347def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
348def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
349def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
350re. Pattern
re. Match
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
351def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
352def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
353def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
214def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
355def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
356def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
357def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
358
Special Attributes of def bit_length[self]:
s = bin[self] # binary representation: bin[-37] --> '-0b100101'
s = s.lstrip['-0b'] # remove leading zeros and minus sign
return len[s] # len['100101'] --> 6
252 objects¶
All parameterized generics implement special read-only attributes
genericalias. __origin__ ¶This attribute points at the non-parameterized generic class
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 613genericalias. __args__ ¶
This attribute is a
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66394 [possibly of length 1] of generic types passed to the original
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6260 of the generic class
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 614genericalias. __parameters__ ¶
This attribute is a lazily computed tuple [possibly empty] of unique type variables found in
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6306
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 615
Note
A
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6252 object with
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6364 parameters may not have correct
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6365 after substitution because
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6364 is intended primarily for static type checkinggenericalias. __unpacked__ ¶
A boolean that is true if the alias has been unpacked using the
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66400 operator [see
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6368]
New in version 3. 11
See also
PEP 484 - Type HintsGiới thiệu khung của Python cho các chú thích loại
PEP 585 - Type Hinting Generics In Standard CollectionsIntroducing the ability to natively parameterize standard-library classes, provided they implement the special class method
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6260Generics , user-defined generics and
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6370
Documentation on how to implement generic classes that can be parameterized at runtime and understood by static type-checkers
New in version 3. 9
Union Type¶
Đối tượng hợp lưu giữ giá trị của phép toán
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6371 [theo bit hoặc] trên nhiều đối tượng loại . Các loại này chủ yếu dành cho chú thích loại . The union type expression enables cleaner type hinting syntax compared to
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6372. X . Y . .
Defines a union object which holds types X, Y, and so forth.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6373 means either X or Y. Nó tương đương với
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6374. Ví dụ: hàm sau mong đợi một đối số kiểu
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6901 hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6902
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 616union_object == khác
Các đối tượng kết hợp có thể được kiểm tra sự bình đẳng với các đối tượng kết hợp khác. Chi tiết
Liên minh công đoàn bị san bằng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
17Các loại dư thừa được loại bỏ
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
18Khi so sánh các công đoàn, thứ tự bị bỏ qua
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
19Nó tương thích với
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
372def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
20Các loại tùy chọn có thể được viết dưới dạng hợp nhất với
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
31def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
21
Các cuộc gọi đến
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6297 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6298 cũng được hỗ trợ với một đối tượng liên kết
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 622
Tuy nhiên, không thể sử dụng các đối tượng hợp có chứa các tổng quát được tham số hóa .
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 623
Loại tiếp xúc với người dùng cho đối tượng hợp nhất có thể được truy cập từ
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6381 và được sử dụng để kiểm tra
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6297. An object cannot be instantiated from the type
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 624
Note
Phương thức
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6383 cho các đối tượng kiểu đã được thêm vào để hỗ trợ cú pháp
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6373. Nếu một siêu dữ liệu triển khai
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6383, Liên minh có thể ghi đè lên nó
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 625
See also
PEP 604 – PEP đề xuất cú pháp
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6373 và kiểu Union
New in version 3. 10
Các loại tích hợp khác¶
Trình thông dịch hỗ trợ một số loại đối tượng khác. Hầu hết trong số này chỉ hỗ trợ một hoặc hai thao tác
Mô-đun¶
Hoạt động đặc biệt duy nhất trên một mô-đun là truy cập thuộc tính.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6387, trong đó m là một mô-đun và tên truy cập vào tên được xác định trong bảng ký hiệu của m. Thuộc tính mô-đun có thể được gán cho. [Lưu ý rằng câu lệnh
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6388 nói đúng ra không phải là một thao tác trên đối tượng mô-đun;
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6389 không yêu cầu đối tượng mô-đun có tên foo tồn tại, thay vào đó, nó yêu cầu định nghĩa [bên ngoài] cho mô-đun có tên foo ở đâu đó. ]
Một thuộc tính đặc biệt của mọi mô-đun là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6390. Đây là từ điển chứa bảng ký hiệu của module. Việc sửa đổi từ điển này sẽ thực sự thay đổi bảng ký hiệu của mô-đun, nhưng không thể gán trực tiếp cho thuộc tính
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6390 [bạn có thể viết
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6392, định nghĩa
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6393 là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 655, nhưng bạn không thể viết
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6395]. Sửa đổi trực tiếp
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6390 không được khuyến nghị
Các mô-đun được tích hợp trong trình thông dịch được viết như thế này.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6397. Nếu được tải từ một tệp, chúng được viết là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6398
Lớp và thực thể lớp¶
Xem Đối tượng, giá trị và loại và Định nghĩa lớp .
Chức năng¶
Các đối tượng hàm được tạo bởi các định nghĩa hàm. Thao tác duy nhất trên một đối tượng hàm là gọi nó.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6399
Thực sự có hai hương vị của các đối tượng chức năng. chức năng tích hợp và chức năng do người dùng xác định. Cả hai đều hỗ trợ cùng một thao tác [để gọi hàm], nhưng cách thực hiện khác nhau, do đó các loại đối tượng khác nhau
Xem Định nghĩa hàm để biết thêm thông tin.
Phương pháp¶
Phương thức là các hàm được gọi bằng cách sử dụng ký hiệu thuộc tính. Có hai hương vị. các phương thức tích hợp sẵn [chẳng hạn như
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6400 trong danh sách] và các phương thức thể hiện của lớp. Các phương thức tích hợp được mô tả với các loại hỗ trợ chúng
Nếu bạn truy cập một phương thức [một hàm được xác định trong không gian tên lớp] thông qua một thể hiện, bạn sẽ nhận được một đối tượng đặc biệt. một đối tượng phương thức ràng buộc [còn gọi là phương thức thể hiện]. Khi được gọi, nó sẽ thêm đối số
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6401 vào danh sách đối số. Các phương thức ràng buộc có hai thuộc tính chỉ đọc đặc biệt.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6402 là đối tượng mà phương thức hoạt động và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6403 là hàm thực thi phương thức. Gọi
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6404 hoàn toàn tương đương với gọi
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6405
Giống như các đối tượng hàm, các đối tượng phương thức ràng buộc hỗ trợ nhận các thuộc tính tùy ý. Tuy nhiên, vì các thuộc tính của phương thức thực sự được lưu trữ trên đối tượng chức năng cơ bản [
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6406], nên việc đặt các thuộc tính của phương thức trên các phương thức bị ràng buộc là không được phép. Cố gắng đặt một thuộc tính trên một phương thức sẽ dẫn đến việc tăng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6407. Để đặt một thuộc tính phương thức, bạn cần đặt nó một cách rõ ràng trên đối tượng hàm bên dưới
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 626
Xem Hệ thống phân cấp loại tiêu chuẩn để biết thêm thông tin.
Đối tượng mã¶
Các đối tượng mã được triển khai sử dụng để biểu thị mã Python thực thi được "biên dịch giả" chẳng hạn như thân hàm. Chúng khác với các đối tượng chức năng vì chúng không chứa tham chiếu đến môi trường thực thi toàn cầu của chúng. Các đối tượng mã được trả về bởi hàm
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6408 tích hợp và có thể được trích xuất từ các đối tượng hàm thông qua thuộc tính
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6409 của chúng. Xem thêm mô-đun
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6410
Việc truy cập vào
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6409 sẽ tạo ra một sự kiện kiểm tra
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6412 với các đối số
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6413 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6414.
Một đối tượng mã có thể được thực thi hoặc đánh giá bằng cách chuyển đối tượng đó [thay vì chuỗi nguồn] tới các hàm dựng sẵn
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6415 hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6416
Xem Hệ thống phân cấp loại tiêu chuẩn để biết thêm thông tin.
Nhập đối tượng¶
Loại đối tượng đại diện cho các loại đối tượng khác nhau. Loại đối tượng được truy cập bằng chức năng tích hợp sẵn
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6417. Không có thao tác đặc biệt nào trên các loại. Mô-đun tiêu chuẩn
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6418 xác định tên cho tất cả các loại tích hợp tiêu chuẩn
Các loại được viết như thế này.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6419
Đối tượng Null¶
Đối tượng này được trả về bởi các hàm không trả về giá trị một cách rõ ràng. Nó không hỗ trợ các hoạt động đặc biệt. Có chính xác một đối tượng null, tên là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631 [tên dựng sẵn].
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6421 tạo ra cùng một singleton
Nó được viết là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 631
Đối tượng Dấu chấm lửng¶
Đối tượng này thường được sử dụng bằng cách cắt lát [xem Cắt lát ]. Nó không hỗ trợ các hoạt động đặc biệt. Có chính xác một đối tượng dấu chấm lửng, tên là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6423 [tên tích hợp].
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6424 tạo ra đĩa đơn
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6423.
Nó được viết là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6423 hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6427
Đối tượng không được triển khai¶
Đối tượng này được trả về từ phép so sánh và phép toán nhị phân khi chúng được yêu cầu thao tác trên các loại mà chúng không hỗ trợ. Xem So sánh để biết thêm thông tin. Có chính xác một đối tượng
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6428.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6429 tạo ra cá thể đơn lẻ.
Nó được viết là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6428
Giá trị Boolean¶
Giá trị Boolean là hai đối tượng hằng số
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656. Chúng được sử dụng để biểu thị giá trị thật [mặc dù các giá trị khác cũng có thể được coi là sai hoặc đúng]. Trong ngữ cảnh số [ví dụ: khi được sử dụng làm đối số cho toán tử số học], chúng hoạt động giống như các số nguyên 0 và 1 tương ứng. Có thể sử dụng hàm tích hợp sẵn
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6433 để chuyển đổi bất kỳ giá trị nào thành Boolean, nếu giá trị đó có thể được hiểu là giá trị thực [xem phần Kiểm tra giá trị thực above].
Chúng được viết lần lượt là
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 638 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 656
Đối tượng bên trong¶
Xem Hệ thống phân cấp loại tiêu chuẩn để biết thông tin này. Nó mô tả các đối tượng khung ngăn xếp, đối tượng truy nguyên và đối tượng lát.
Thuộc tính đặc biệt¶
Việc triển khai thêm một vài thuộc tính chỉ đọc đặc biệt cho một số loại đối tượng, nơi chúng có liên quan. Một số trong số này không được báo cáo bởi hàm tích hợp
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6436đối tượng. __dict__ ¶
Từ điển hoặc đối tượng ánh xạ khác được sử dụng để lưu trữ các thuộc tính [có thể ghi] của đối tượng
ví dụ. __class__ ¶Lớp mà một thể hiện của lớp thuộc về
lớp. __base__ ¶Bộ các lớp cơ sở của một đối tượng lớp
định nghĩa. __name__ ¶Tên của lớp, hàm, phương thức, bộ mô tả hoặc thể hiện của trình tạo
định nghĩa. __qualname__ ¶The tên đủ điều kiện của lớp, hàm, phương thức, bộ mô tả hoặc thể hiện trình tạo.
New in version 3. 3
lớp. __mro__ ¶Thuộc tính này là một bộ các lớp được xem xét khi tìm kiếm các lớp cơ sở trong quá trình phân giải phương thức
lớp. mro[] ¶Phương thức này có thể được ghi đè bởi một siêu dữ liệu để tùy chỉnh thứ tự phân giải phương thức cho các phiên bản của nó. Nó được gọi khi khởi tạo lớp và kết quả của nó được lưu trữ trong
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6437lớp. __phân lớp__[] ¶
Mỗi lớp giữ một danh sách các tham chiếu yếu đến các lớp con trực tiếp của nó. Phương thức này trả về một danh sách tất cả các tham chiếu vẫn còn tồn tại. Danh sách theo thứ tự định nghĩa. Ví dụ
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 627
Giới hạn độ dài chuyển đổi chuỗi số nguyên¶
CPython có giới hạn toàn cầu cho việc chuyển đổi giữa
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6901 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66422 để giảm thiểu các cuộc tấn công từ chối dịch vụ. Giới hạn này chỉ áp dụng cho cơ số thập phân hoặc cơ số không phải lũy thừa hai. Chuyển đổi thập lục phân, bát phân và nhị phân là không giới hạn. Giới hạn có thể được cấu hình
Loại ________ 6901 trong Python là một số có độ dài tùy ý được lưu trữ ở dạng nhị phân [thường được gọi là “bignum”]. Không tồn tại thuật toán nào có thể chuyển đổi một chuỗi thành một số nguyên nhị phân hoặc một số nguyên nhị phân thành một chuỗi trong thời gian tuyến tính, trừ khi cơ số là lũy thừa của 2. Ngay cả các thuật toán được biết đến nhiều nhất cho cơ số 10 cũng có độ phức tạp bậc hai. Chuyển đổi một giá trị lớn chẳng hạn như
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6441 có thể mất hơn một giây trên CPU nhanh
Giới hạn kích thước chuyển đổi cung cấp một cách thiết thực để tránh CVE-2020-10735
Giới hạn được áp dụng cho số ký tự chữ số trong chuỗi đầu vào hoặc đầu ra khi sử dụng thuật toán chuyển đổi phi tuyến tính. Dấu gạch dưới và dấu không được tính vào giới hạn
Khi một hoạt động sẽ vượt quá giới hạn, một
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6977 được nâng lên
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 628
Giới hạn mặc định là 4300 chữ số như được cung cấp trong
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6443. Giới hạn thấp nhất có thể được định cấu hình là 640 chữ số như được cung cấp trong
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6444
xác minh
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 629
New in version 3. 11
API bị ảnh hưởng¶
Giới hạn chỉ áp dụng cho các chuyển đổi có khả năng chậm giữa
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6901 và
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66422 hoặc
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66423
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
448 với cơ sở mặc định 10def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
449 cho tất cả các cơ số không phải là lũy thừa của 2def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
450def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
451bất kỳ chuyển đổi chuỗi nào khác sang cơ số 10, ví dụ:
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
452,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
453 hoặcdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
454
Các giới hạn không áp dụng cho các hàm có thuật toán tuyến tính
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
449 với cơ số 2, 4, 8, 16 hoặc 32def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
456 vàdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
457def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
458,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
459,def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
460Ngôn ngữ nhỏ đặc tả định dạng cho các số hex, bát phân và nhị phân.
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6422 đếndef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
902def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
6422 đếndef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
908
Định cấu hình giới hạn¶
Trước khi Python khởi động, bạn có thể sử dụng biến môi trường hoặc cờ dòng lệnh của trình thông dịch để định cấu hình giới hạn
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
465, e. g.def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
466 để đặt giới hạn thành 640 hoặcdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
467 để tắt giới hạndef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
468, e. g.def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
469def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
470 chứa giá trị củadef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
465 hoặcdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
468. Nếu cả tùy chọn env var và tùy chọndef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
473 được đặt, thì tùy chọndef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
473 sẽ được ưu tiên. Giá trị -1 cho biết rằng cả hai đều không được đặt, do đó, giá trị củadef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
443 đã được sử dụng trong quá trình khởi tạo
Từ mã, bạn có thể kiểm tra giới hạn hiện tại và đặt giới hạn mới bằng cách sử dụng các API
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6476 này
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
477 vàdef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
478 là một công cụ getter và setter cho giới hạn toàn phiên dịch. Phiên dịch viên phụ có giới hạn riêng của họ
Thông tin về mặc định và tối thiểu có thể được tìm thấy trong
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6479
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
443 là giới hạn mặc định được biên dịch sẵndef bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6
444 là giá trị thấp nhất được chấp nhận cho giới hạn [khác 0 sẽ vô hiệu hóa nó]
New in version 3. 11
thận trọng
Đặt giới hạn thấp có thể dẫn đến sự cố. Mặc dù hiếm gặp, mã tồn tại chứa các hằng số nguyên ở dạng thập phân trong nguồn của chúng vượt quá ngưỡng tối thiểu. Hệ quả của việc đặt giới hạn là mã nguồn Python chứa các số nguyên thập phân dài hơn giới hạn sẽ gặp lỗi trong quá trình phân tích cú pháp, thường là tại thời điểm khởi động hoặc thời điểm nhập hoặc thậm chí tại thời điểm cài đặt - bất kỳ lúc nào bản cập nhật
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6482 chưa tồn tại cho . Một giải pháp thay thế cho nguồn chứa các hằng số lớn như vậy là chuyển đổi chúng sang dạng thập lục phân
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 66312 vì nó không có giới hạn
Kiểm tra ứng dụng của bạn kỹ lưỡng nếu bạn sử dụng giới hạn thấp. Đảm bảo các thử nghiệm của bạn chạy với giới hạn được đặt sớm thông qua môi trường hoặc cờ để nó áp dụng trong quá trình khởi động và thậm chí trong bất kỳ bước cài đặt nào có thể gọi Python để biên dịch trước nguồn
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6484 thành tệp
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6482
Cấu hình đề xuất¶
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6443 mặc định dự kiến sẽ hợp lý cho hầu hết các ứng dụng. Nếu ứng dụng của bạn yêu cầu một giới hạn khác, hãy đặt giới hạn đó từ điểm vào chính của bạn bằng cách sử dụng mã bất khả tri của phiên bản Python vì các API này đã được thêm vào trong các bản phát hành bản vá bảo mật trong các phiên bản trước 3. 11
Example
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 630
Nếu bạn cần tắt hoàn toàn, hãy đặt thành
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 642
chú thích
1Thông tin bổ sung về các phương pháp đặc biệt này có thể được tìm thấy trong Hướng dẫn tham khảo Python [ Tùy chỉnh cơ bản ].
2Kết quả là, danh sách
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6488 được coi là bằng với
def bit_length[self]: s = bin[self] # binary representation: bin[-37] --> '-0b100101' s = s.lstrip['-0b'] # remove leading zeros and minus sign return len[s] # len['100101'] --> 6489 và tương tự đối với các bộ dữ liệu3
Chúng phải có vì trình phân tích cú pháp không thể cho biết loại toán hạng
4[1,2,3,4]Các ký tự viết hoa là những ký tự có thuộc tính danh mục chung là một trong số “Lu” [Chữ cái, chữ hoa], “Ll” [Chữ cái, chữ thường] hoặc “Lt” [Chữ cái, chữ hoa tiêu đề]
5[1,2]Do đó, để chỉ định dạng một bộ dữ liệu, bạn nên cung cấp một bộ dữ liệu đơn có phần tử duy nhất là bộ dữ liệu được định dạng