Corner radius bằng bao nhiêu to 45
one detail that i should have added is that this manifests for me when i enlarge the round-corner shape to use as outer framing for a larger diagram. at default size the round-corner shape looks fine, but when enlarged, the corner scales proportionately and it ends up being too pronounced at larger sizes. one side effect of this is that text aligned to a corner (e.g. top/left) actually touches the border.
Userlevel 6
@tony k I learned a trick to alter the severity of the rounded cornering. You cannot have a border on the shape, which might be a deal-breaker for some, but this solution works pretty well otherwise. Once you have a shape with corners you like, you can template it or copy and paste it on your board to use multiple times. Check it out HERE. Jon Userlevel 4
Hi@tony k, Userlevel 6
Some genius stuff from@Jonathan White I gotta keep that in my toolbox. I
You can use the Wireframes components in the Apps area. Take a Text area and delete the text and the corners are consistent no matter how big you make the field Limitations:
this works for bigger boxes and at least you can get the outline - hope this helps C
Please fix this. Corner radius should not change based on width, user should be able to match radius of larger and smaller boxes, and stroke width should not change based on size of box. Những nhà máy bán kính cán góc Betalent được làm bởi những thanh sắt carbide chất cao và được thiết kế bởi những nhà thiết kế hàng xa chuyên nghiệp với góc lưỡi hợp lý, hình lưỡi dao, số loại sáo, và rãnh nhỏ.Và tất cả những loại máy xay cuối kiểu này được cấu tạo bởi máy xay Walter 5 được nhập khẩu để đạt mức độ chính xác cao.Sau đó, một loại thụ động đặc biệt và một lớp phủ đích thực được làm cho các nhà máy kết thúc hoàn hảo để làm cho cối xay cuối cứng hơn và lâu hơn. Có bốn loại carbide được áp dụng cho các nhà máy sản xuất bằng phẳng chung: BTS45, cho các nguyên liệu làm khô có độ cứng từ cao HC4 đến cao HC4 Cao cấp, loại trụ P, K, và loại thép không rỉ mềm hơn thuộc nhóm M trong phân loại ISO. BT50, cho HRC tới HRC 33degree, chủ yếu là M, N, và K. BTChừng, cho HRC-54th, cho mảnh ghép S, M và K.BJDZ BTK, cho loại HRC 60 đến 65, cho những chất liệu bị dập (HRC khoảng cách), gỗ cứng, và bột kết thúc của SUS XI6L, phần lớn tác phẩm dưới lớp ISO H. You can give any element “rounded corners” by applying a 0 through CSS. You’ll only notice if there is a color change involved. For instance, if the element has a background-color or border that is different than the element it’s above.
Constituent properties 0 is what we call a “shorthand” property. That means it sets the following individual properties in a single declaration:
Logical propertiesThose are referred to as “physical” properties because they set the radius according to the physical location of the corner (e.g. top-left). But 0 is part of the Logical Properies and Values specification, meaning it has logical equivalents of the physical properties:Physical propertyLogical property 2 8 3 0 5 2 4 4It’s a bit mind-bendy at first, but the order really matters, especially when working with 0 as a shorthand. The order goes like this, where the first direction refers to the block direction and the second direction refers to the inline direction.Physical propertyLogical property 6 7 8 9 0 1 2 3Syntax
The 0 property takes between one and four length or percentage values, where one value sets the radius for all four corners at once, while four sets each individual corner.
So, if we wanted to set a different radius on the top-left and bottom-right but apply the same radius on the top-right and bottom-left together, we can use the three-value syntax:
Elliptical rounding (.element {
/* top-left top-right/bottom-left bottom-right */
border-radius: 5px 20px 5px;
background: #BADA55;
} |