Dicapac wp s10 waterproof case review năm 2024

I thought when I ordered it that, like some other waterproof enclosures, it would actually have a filter ring connection to keep the lens centered on the port, but it doesn't. The 82mm description is just the maximum size a lens can be at the end, where the material switches from soft vinyl to hard plastic.

The 50-135 fits pretty well (with no hood), and because it's an internal zoom, would be most flexible, but it's very difficult to zoom with the small finger sleeves, they're not quite placed right for the 50-135's zoom ring, and my copy is a bit stiff.

My Tamron 28-75/2.8 - without the hood, it fits and can zoom from 28-75, but it doesn't stay centered in the port, and I end up with a black crescent on part of the image if I'm not careful. With the hood, it stays centered just about perfectly, but can only zoom to around 50mm. Next I'll try it with the hood reversed, since you can't manual focus it anyway, and that should keep it centered.

Waterproofing -- it worked flawlessly in my initial tests. It's like a heavy duty ziplock style bag that you roll up tightly and strips of velcro keep the rolling tightly sealed, and then additional closure over that to keep you from accidentally tearing open the velcro seals.

Based on my tests with it, I think I'm going to try and exchange it for the WP-S5, which is the size that's recommended for Pentax DSLRs. On that one, the lens can only be 50mm long, but I have a Pentax 28-70/f4 that should fit in there and do the trick.

Of course, that's for using it while boating and so on, where I'm just paranoid it might fall in the water. For underwater, I'd probably try a wide angle, and I'm sure the 15mm or 10-20 would work great (in the WP-S5, anyway)

| DiCAPac

Email me when stock arrives

Shipping & Availability

Usually ships in 4 - 6 working days. Deliver to Victoria for $9.90 Change location

Click & Collect Availability

Sydney Out of stock. Pickup in4 - 6 working days


  • Waterproof underwater housing
  • Has port for lenses 50mm to 150mm long
  • All controls are accessible
  • UV coating polycarbonate on the lens


The DICAPac WP-S10 Waterproof Case will protect your SLR camera when you are using it at the beach, swimming, kayaking, skiing, fishing, sailing, snorkelling or diving. This is a PVC vinyl housing with a polycarbonate lens. It can be used with SLR cameras. The housing meets JIS IPX8 requirements for underwater usage.

The case is compatible with SLR cameras that have a length of 120mm or smaller. The lens can be 50mm to 150mm long.


  • Waterproof underwater housing usable up to 5.0 m
  • Meets standard requirements for JIS (Japan Industrial Standards) IPX8 at 0.5 water pressure (underwater 5.0m), tested for 30 minutes
  • Has port for lenses 50mm to 150mm long
  • All controls are accessible
  • UV coating polycarbonate on the lens for clear pictures
  • Ideal for taking pictures in the rain, at the beach, or on the ski slopes


Fitting Guide


Construction PVC vinyl plastic with polycarbonate lens port Control Type Pressure through flexible material Controls All Depth Rating 16.4' ( 5.0 m ) Buoyancy Positive Port Polycarbonate flat lens port Internal Flash Usable No External Strobe Connector No TTL Compatible No Moisture Alarm No Colour Clear/dark brown Dimensions (WxHxD) 270 x 230 x 190mm Lens: 105 x 85 x 115mm Weight (without Camera) 410g


0.0(no ratings yet)

Own or use this product? Give it a quick rating: