Lỗi load envelope c5 paper in manual feed slot năm 2024

Only a sheet of paper can be loaded in the manual feed slot. Two or more sheets of paper cannot be loaded at a time.

When the paper is loaded, it is sent into the slot a little. (The paper is not sent into the slot during the sleep state or printing.)

Loading paper is now completed.

Loading Index Card or Envelopes

1. Adjust the paper guides to the width of the loaded Index Card or envelope.

The paper guides move together.

2. Gently load an envelope or Index Card until it touches the back of the tray.

Only an envelope or Index Card can be loaded in the manual feed slot. Two or more sheets of paper cannot be loaded at a time.

When the envelope or Index Card is loaded, it is sent into the slot a little. (The envelope or Index Card is not sent into the slot during the sleep state or printing.)

Loading paper is now completed.

Loading Custom Size Paper (Non-Standard Paper)

1. Adjust the paper guides to the width of the loaded paper.

The paper guides move together.

2. Gently load the paper stack until it touches the back of the tray.

Only a sheet of paper can be loaded in the manual feed slot. Two or more sheets of paper cannot be loaded at a time.

When the paper is loaded, it is sent into the slot a little. (The paper is not sent into the slot during the sleep state or printing.)

Register the size of the loaded custom size paper using the following procedure.

If printing custom size paper, you need to register the custom paper size in the printer driver previously.

IMPORTANT

A user without administrator rights cannot register the custom paper size. Be sure to log on as a user with administrator rights before registering the custom paper size.

If you are not sure about the permissions, ask your computer administrator.

3. Display the [Printers and Faxes] folder or the [Printers] folder.

From the [Start] menu, select [Settings] > [Printers].

From the [Start] menu, select [Printers and Faxes].

From the [Start] menu, select [Control Panel], and then click [Printers and Other Hardware] > [Printers and Faxes].

From the [Start] menu, select [Control Panel], and then click [Printer].

4. Right-click the icon for this printer, then select [Printing Preferences] from the pop-up menu.

5. Display the [Page Setup] sheet (1), then click [Custom Paper Size] (2).

6. Specify the following options as needed.

[Paper List]: Displays [Name] and [Size] of standard paper sizes and added custom paper sizes.

[Name of Custom Paper Size]: Enter the name of the custom paper size to be added. Up to 31 characters can be entered.

When you want to print on paper that is not loaded in the paper drawer, load the paper in the manual feed slot. Load the paper that you usually use in the paper drawer.

Make sure to load paper in portrait orientation

Paper cannot be loaded in landscape orientation. Make sure to load the paper in portrait orientation, as shown in the illustrations below.

MF729Cx

MF628Cw / MF621Cn

For the MF729Cx

Make sure to insert the paper drawer

The machine only prints when the paper drawer is inserted, even if paper is loaded in the manual feed slot. An error message is displayed if you attempt to print without inserting the paper drawer.

1

Open the cover.

Hold the top center of the cover to open it.

2

Pull out the paper tray and the tray extension.

Pull out the tray extension when loading large paper.

3

Spread the paper guides apart.

Slide the paper guides outward.

4

Insert the paper into the manual feed slot until the paper stops.

Load the paper in portrait orientation (with the short edge toward the machine), with the print side face up. Paper cannot be loaded in landscape orientation.

Fan the paper stack well, and tap it on a flat surface to align the edges.

Do not exceed the load limit line when loading paper

Make sure that the paper stack does not exceed the load limit line (

). Loading too much paper can cause paper jams.

5

Align the paper guides against the edges of the paper.

Slide the paper guides inward until they are aligned securely against the edges of the paper.

Align the paper guides securely against the edges of the paper

Paper guides that are too loose or too tight can cause misfeeds or paper jams.

»

Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)

You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the paper drawer () or manual feed slot, with the side to print face up (previously printed side face down).

When using the manual feed slot, load one sheet of paper each time you print.

You can use only the paper printed with this machine.

You cannot print on the side that has previously been printed on.

If the printouts look faded, select for , , or , depending on the paper source you are using, in .