Option 1. Buy a new 105mm alphacol Eisbecher tube + Eisbecher top and just replace them, less work but I have heard some bad things about Alphacool Plexi/Acryl quality.

Option 2. Buy a EK-XRES 100 Glass D5 PWM and use a EK-UNI Pump Bracket (120mm FAN)

and mount it on the bottom front fan.

My worry is that the inlet and outlet G1/4 threads get blocked by the Fractal R6 PSU cover that I have(see attached picture).

I saw another user post his X-RES 140 revo D5 and it seems to be doubtful or barely I can fit inlet and outlet compression fitting above my Fractal R6 PSU cover?

Option 3. Buy the same EK-XRES 100 D5 as Option 2 but install it on 2nd fan in front, this assumes the EK-XRES 100 is short enought to not interfere with the front radiator tubing in top

There is no Option 4 as I do not want to drill in the case.

My setup:

Another user setup with the EK-XRES 140 without PSU cover:

• 2

Joined Mar 5, 2012 Messages 1

I was able to the EK-XRES 140 into the side chamber of a Corsair Carbide Air 240, between the HDD and SSD trays, if that gives you an idea. You might not even need a bracket if you don't move the case around so much.

Our servers are getting hit pretty hard right now. To continue shopping, enter the characters as they are shown in the image below.

Type the characters you see in this image:

Type characters

Try different image

© 1996-2014, Amazon.com, Inc. or its affiliates